The mathematical model of laser carving depth was established.
基于激光三维雕刻对单层雕刻深度的工艺需求,采用不同雕刻工艺参数对A l2O3陶瓷进行雕刻实验。
Application of DUV deep lithography in LIGA process;
深紫外深度光刻蚀在LIGA工艺中的应用
The relation of energ/etching depth is obtained.
根据Grune公式就电子束能量对抗蚀剂刻蚀深度的影响进行了理论分析,并在SDS-2电子束曝光机上分别采用5keV、10keV、15keV、20keV、25keV、30keV等能量的电子束对国产胶苏州2号进行了曝光实验,得出了能量/刻蚀深度关系曲线。
The etching depth of the circles showed a decreasing trend in the same processing conditions.
比较了相同实验条件下直线轨迹与圆环轨迹的刻蚀深度。
1. Discussing diffractive efficiency of DOEThere are alignment errors, linewidth errors and etching errors infabrication of DOE.
衍射光学元件在制作过程中，存在掩模对准、线宽和刻蚀深度等制作误差。
Acceptable Error of Etching Depth in Ion Beam Etching Microlens
离子束蚀刻微透镜中蚀刻深度允许误差的研究
multi-tone etching
(陶瓷) (玻璃) (法国式浮雕) 多种深度结合的蚀刻
Deep-scan Analysis of Composition and Valence of Vanadium Oxide Thin Film
氧化钒薄膜成分及价态的深度刻蚀分析
Effects of Technical Parameters on Etching Rate and Selectivity of Si Deep Trench Using ICP Etching
硅深槽ICP刻蚀中刻蚀条件对形貌的影响
Study on Etch Selectivity Ratio of Masking Materials in Silicon Deep Etching
硅深刻蚀中掩蔽层材料刻蚀选择比的研究
Parameter Optimization Based on High-Aspect Ratio Si Dry Etching
基于高深宽比Si干法刻蚀参数优化
etchings, woodcuts, lithographs;
蚀刻、木刻、平版画；
Investigation of Electro Chemical Deep Etching Technology for Micro-nano-Electro-Mechanical System Device Fabrication;
应用于微纳机电器件制造的电化学深刻蚀技术
NUMERICAL STUDIES ON ETCH PROFILES IN HIGH-DENSITY PLASMA;
高密度等离子体刻蚀轮廓的数值研究
Multilayer Dielectric Gratings: In-situ Monitoring of Duty Cycle of photoresist Mask and Ion-Beam-Etched Groove Depth;
介质膜光栅：光刻胶掩模占宽比和离子束刻蚀槽深的监控
The resolution of an etching process is a measure of the fidelity of pattern transfer.
刻蚀工艺的分辨率是图形转移保真度的量度。
Strength of emotion
（感情的）强烈程度，深刻程度
Effects of Current Density on Properties of Low-Temperature Iron Plating without Pre-etching
电流密度对无刻蚀低温镀铁性能的影响
Research on Several Design Problems of Deep-Etched Concave Diffraction Grating Wavelength Division Multiplexers;
深刻蚀凹面衍射光栅波分复用器若干设计问题的研究
gas discharge etching
气体放电蚀刻[法]
laser engraving, laser etching
激光雕刻，激光蚀刻
a block that has been etched or engraved.
一块被蚀刻或雕刻的板。
