TiN and (Ti,Cr)N composite films were deposited on high speed steel by AIP-01 multi-arc ion plating.
利用AIP 01型多弧离子镀膜机在高速钢基体上制备了TiN及(Ti,Cr)N复合薄膜, 对制得的薄膜进行盐水全浸泡试验, 研究了带有宏观熔滴颗粒的TiN及(Ti,Cr)N复合薄膜的腐蚀机理。
Influence of argon arc remelting process on microstructure and properties of coating prepared by hot dipping aluminizing on surface Q235 steel
氩弧重熔对Q235钢热浸镀铝层组织和性能的影响
The microstructure,wear resisting and abrasive mechanism of argon arc remelting area of alloyed casting iron camshaft is studied.
研究了合金铸铁凸轮轴氩弧重熔淬火后强化层的组织、耐磨性及磨损机理。
This paper studied the causes of the early stage pitting on local areas and peeling off after 5000km drive in some grey cast iron camshafts which were treated by argon arc remelting.
分析研究了灰铸铁凸轮轴经氩弧重熔工艺处理后，约５０００ｋｍ 正常行驶后个别轴局部区域出现早期麻点与部分剥落而失效，结果证明早期失效的原因为氩弧重熔工艺不稳定所致。
The reason of arc restriking overvoltage is analyzed in view of the restriking condition when the 35kV vacuum circuit breaker breaks the reactive compensation device.
针对35kV真空断路器开断无功补偿装置时发生重燃的实际情况,分析了其电弧重燃产生过电压的机理。
Arc remelting is an advanced processing to increase properties of contact material for vacuum switches,and the properties of contact are determined by arc contact material interaction in the process of arc remelting.
电弧重熔法是提高真空开关触头材料性能的一种先进工艺方法 ,触头材料的性质决定于电弧与触头材料间的作
Horton noded spheroidal tank
哈通多弧形扁球体罐
The Performance and the Application of the Metal Nitride Thin Film by Multi-arcs Ion Plating;
多弧离子镀氮化物薄膜的性能及应用
Research on Mo+C Implantation into TiN Film by Multi-arc Ion Plating
Mo+C离子注入多弧离子镀TiN薄膜研究
Growth and Mechanical Properties of Multi-Component(Ti,Al,Zr,Cr) N Coatings by Multi-Arc Ion Plating
多弧离子镀(Ti,Al,Zr,Cr)N多组元氮化物膜的研究
Cathodic arc ion plating (CAIP) has been widely applied in modern technology field.
多弧离子镀在现代科技领域中有着广泛的应用。
A Study on Deposition Process in Cathodic Arc Ion Plating Through Computer Simulation;
多弧离子镀沉积过程的计算机模拟研究
Study on Process of Nanocomposite Superhard Films Prepared by Arc Ion Plating;
多弧离子镀制备纳米复合超硬膜的工艺研究
Research on the Structural Behavior of Long-Span Steel Multi-Arches;
大跨度多弧形钢拱结构的受力性能研究
| wandering block sequence
电弧飘移多层焊次序
Key technology and equip of MZ2000/MZE1800/MZE1250 twin/triple wires multi-arcs submerged arc welding
MZ2000/MZE1800/MZE1250多电弧高速节能埋弧焊装备关键技术
Detection of the RTX toxin gene in Vibrio cholerae by multiplex PCR
多重PCR检测霍乱弧菌RTX毒力基因
Study on the Power Unit for Multipurpose Arc Plasma Installation
电弧等离子多用装置专用电源的研究
A broad-band constant beamwidth method for circular multi-element array
多基元宽频带恒定束宽圆弧形声基阵
Design of Injection Mould with Multiple-cores Puller-Equi-spaced in Circumference,Core Pulling in Circular Arc Trace
周向均布多型芯圆弧抽芯注塑模设计
On the Result of experimental Computation in the Adjustment of the Satellite Doppler Network by Short-arc Method
卫星多普勒网短弧法平差的研究结果
Study of CrN_x Coatings Deposited on 2024 Aluminium Alloys by Multi-Arc Ion Plating
2024铝合金表面电弧镀CrN_x多层膜的研究
Isolation and indentification of the Pathogenic vibrio in aquatic products
水产品中多种致病性弧菌的分离鉴定
Development of multiplex PCR-DHPLC typing method for Vibrio cholerae
霍乱弧菌多重PCR-DHPLC分型方法建立
