Study on relationship of viscosity and shear rate of potato starch size;
马铃薯淀粉浆料的粘度与剪切速率关系的研究
Experimental investigation of the apparent viscosity and the shear rate of gelled propellant in straight round pipe;
凝胶推进剂直圆管中剪切速率与表观粘性实验研究
Impact of shear rate on microstructure of PA 6/PP blends
剪切速率对PA 6/PP共混物微观结构的影响
The experimental results show that the apparent viscosity of semi-solid A356 alloy increases with increasing the fraction solid, but decreases with increasing the shearing rate in the steady-state.
结果表明：半固态A356合金的稳态表观粘度(η_a)随着固相分数(f_s)的增加而增加,但随剪切速率(γ)的增大而减小,当f_s达到某一临界值之后,η_a迅速增加,可用方程η_a=2。
The influence of molecular weight, shearing rate and temperature on the rheologic behavior of domestically manufacturing linear PPS (i.
以国产线性聚苯硫醚树脂为原料,研究了分子质量、剪切速率、温度对PPS树脂流变行为的影响。
The diameter, flow, shearing rate ,draw ratio and pressure difference were calculated.
讨论了"┃·"异形喷丝板的设计、纺丝工艺及后加工工艺,计算出喷丝板毛细孔的当量直径、单孔流量、剪切速率、喷丝头拉伸比,验证了喷丝孔的结构参数是影响可纺性的关键因素。
Studies on the Mechanics Behaviour of Joints under Different Shearing Velocity;
不同剪切速率下节理的力学特性研究
Study on Melt Viscosity of PP and FEP/PP Blends at Low Shear Rates
PP及FEP/PP低剪切速率下熔体粘性研究
Determination of viscosity of coatings at a high rate of shear
GB/T9751-1988涂料在高剪切速率下粘度的测定
The apparent viscosity at the point decreases distinctly with shear rate increasing.
随着剪切速率的增加,转相点的视粘度明显下降.
Effects of Shear Rate on Mechanical Behavior of Structured Loess
剪切速率对结构性黄土力学性状的影响
Impact of shear rate on microstructure of PA 6/PP blends
剪切速率对PA 6/PP共混物微观结构的影响
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
INFLUENCE OF SILICA NANOPARTICLES ON THE COALESCENCE OF IMMISCIBLE PDMS/PIB BLENDS UNDER LOW-RATE SHEAR FLOW
纳米SiO_2对PDMS/PIB不相容共混物在低剪切速率下凝聚行为的影响
Study on the Law of the Influence of Temperature and Shear Rate on Viscosity of Yanchang Crude Oil
温度及剪切速率对延长原油粘度的影响规律研究
Research on the Rational Shearing Speed of High-speed Precision Shearing for Metal Bar
金属棒料高速精密剪切适宜剪切速度的研究
Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting
高速切削4Cr5MoSiV1钢形成的绝热剪切带
Formation mechanism and elimination of heavy sparks with the 3~# high-speed flying shear
3号飞剪高速剪切大火花的成因及解决办法
Cause Analysis of Big Spark of Motor of Flying Shear at High Speed Cutting and Its Countermeasures
飞剪高速剪切时大火花的成因及解决办法
The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.
剪切应力数值与其产生应变速率的比值叫粘性，用来衡量非晶材料抵抗永久变形的能力。
Research on spatial simulation method of soil equivalent shear wave velocity
土层等效剪切波速空间模拟方法研究
The adiabatic shear bands of U-5.7Nb at high strain rate
高应变率下U-5.7Nb合金的绝热剪切变形
Research on Rational Shearing Temperature of High Speed Precision Shearing for Bar under Clamping State
基于夹紧状态的棒料高速精密剪切适宜剪切温度的研究
Effects of dynamic shear modulus ratio and velocity on surface ground motion and their equivalent relations
动剪切模量比与剪切波速对地震动影响及等量关系研究
