Transmission efficiency of powder metallurgy helical gear system;
粉末冶金斜齿轮传动效率研究
Simultaneous-control model for hobbing of noncircular helical gears;
非圆斜齿轮滚切加工的联动控制模型
Application of antioxidant HD-40 in carcass ply compound of bias ply tire;
防老剂HD-40在斜交轮胎胎体帘布胶中的应用
The application of the active zinc oxide instead of the indirect method zinc oxide was experimentally investigated in the tread compounds of bias ply tire and steel-belted tire.
试验研究以活性氧化锌减量替代间接法氧化锌在斜交轮胎和半钢子午线轮胎胎面胶中的应用效果。
Three-dimensional FE modeling method for bias tire;
斜交轮胎三维有限元建模方法
Application of anti-oxidant FHD-60 in bias tire;
防老剂FHD-60在斜交轮胎中的应用
Three-dimensional finite element analysis of aerated bias tire;
斜交轮胎充气状态下三维有限元分析
spur and helical hobbing machine
正齿轮和斜齿轮滚齿机
cross helical gear
螺旋齿轮, 交错斜齿轮
The four main types of gears (spur, helical, worm, and bevel)and a rack and pinion are shown in Figure 7.
图7所示是四种主要的齿轮（巨齿轮，斜齿轮，蜗轮和伞齿轮）以及齿条和小齿轮。
bevel gear:Either of a pair of gears with teeth surfaces cut so that they can connect unparallel gear shafts.
斜齿轮:用以连接不平行齿轮轴齿轮的任一对齿面切削。
The Engaging Load and Axial Modification of Helical Gear Used in Increasing Gearbox of Wind Turbine Generator;
风机增速器斜齿轮啮合载荷及齿向修形的研究
Finite Element Contact Analysis of Helical Gears with Surface and Shaft Deviations
考虑齿面及轴线偏差的斜齿轮接触有限元分析
Optimizing Design of the Planetary Helical Gear Based on Minimum Flash Temperature of Tooth Surface
基于齿面闪温最低的行星斜齿轮优化设计
Tooth root stress analysis of involute helical gear based on ANSYS
基于ANSYS的渐开线斜齿轮的齿根应力分析
The helical gear has become worked down over the years.
斜齿轮因为年久而磨损了。
The research and application of contact trace of crossed helical gear pair
交错轴斜齿轮副接触迹的研究与应用
BEM for 3-D Elastic Deformation Analysis in a Cylindrical Helical Gear
圆柱斜齿轮三维弹性变形的边界元法
Basic tooth profile of straight and skew bevel gears
GB/T12369-1990直齿及斜齿锥齿轮基本齿廓
Analysis of Skewed Tooth Bevel Gear and Straight Tooth Bevel Gear
斜齿圆锥齿轮与直齿圆锥齿轮应力分析研究
3-D Finite Element Vibration Analysis of Helical Gears
斜齿圆柱齿轮的三维有限元振动分析
Study on the Meshing Principle of Three-freedom Straight and Inclined Gear;
三自由度直、斜齿齿轮啮合机理的研究
APDL Parametric Solid Modeling of Skew Bevel Gear Based on ANSYS
基于ANSYS的斜齿锥齿轮APDL参数化建模
Multi-target optimization design of the Helical gears drive
斜齿圆柱齿轮传动的多目标优化设计
Parametric Design of Standard Involute Helical Gears Based on Pro/E Wildfire
基于Pro/Engineer标准渐开线斜齿圆柱齿轮参数化设计
