Different galvannealed parameters effecting on coating surface were analyzed.
选取340 MPa高强度IF钢热镀锌钢板作为实验原板,分析了不同镀层退火工艺参数对板带镀层表面的影响,重点研究了镀层退火的温度、保温时间与表面形貌以及η,ζ,1δ各个相的关系。
Effects of glycol in the solutions for deaning, polishing, activating, etching, blackening and film stripping are described.
综述了乙二醇在镀锡、镀锌、镀锡锌合金、镀铜锡合金等电镀工艺中的应用，以及在清洗、抛光、活化、腐蚀、黑化、退镀等工艺溶液中的作用。
Based on tensile tests for hot-dipped galvanized sheets,stripping which before the measurement of surface roughness and investigation on marked location of cross sections were used to compare the topography of the substrate surfaces or the coating interfaces before and after plastic deformation.
以热镀锌板单向拉伸试验为基础,运用化学退镀以及随后的基体表面粗糙度测量和横截面标记观测等试验手段,比较了塑性变形前后基体表面及界面的形貌,得出,塑性变形过程中,基体表面作为界面的一部分会产生粗糙化现象,但这种粗糙化会受到镀锌层的抑制,因此界面并不会出现明显的形貌变化,然而这种基体表面粗糙化所产生的应力,可能导致界面失效。
The stripping rate and matrix corrosion condition of three kinds of stripping technology of nickel coatings on NdFeB,were investigated.
探讨了退镀原理及影响退镀的各种因素。
RESEARCH INTO THE TECHOLOGY OF REMOVING ELECTROLESS Ni-P ALLOYS FROM ALUMINUM BASE ALLOYS SURFACE;
铝合金化学镀Ni-P合金层退镀工艺探讨
Research on Extracting Cu and Ni from Nitric Stripping Solution and the Recycling Technology
硝酸退镀液中铜镍分离回收与资源化工艺研究
The Effects of Rapid Thermal Annealing on the Crystalline Phases of Zinc-Magnesium Alloy Film Prepared by Vacuum Evaporation
快速退火对真空镀锌镁合金镀层晶相的影响
Stripping Technology of Nickel Coating on Sintering NdFeB Permanent Magnet
烧结型钕铁硼镀镍层退除工艺的研究
Galvanizing and Continuous Annealing of Dual-Use Technology Research on Existing Hot-Dip Galvanizing Line
在现有热镀锌机组上实现镀锌和退火两用生产的工艺研究
Annealing hardening of nanocrystalline Ni-Fe alloy coatings synthesized by brush plating using soluble anode
可溶性阳极电刷镀纳米晶Ni-Fe合金镀层的退火再强化
The Annealing Furnace is a key Equipment for any Hot Dip Galvanizing Line.
对于任何连续热镀锌线退火炉都是关键设备。
A Research on the New Technique for Rapid Stripping of Cu/Ni/Cr Deposits
快速退除铜/镍/铬等金属镀层新工艺的研究报告
DEVELOPMENT OF A COMPUTER HYBRID CONTROL SYSTEM FOR CONTINUOUS ANNEALING FURNACE OF HOT DIP GALVANIZING
热镀锌退火炉的计算机混合控制系统开发
The Effect of Annealing Temperature on the Properties and Second-Phase Particles of 0.4 mm Galvanized Ti-IF Steel
退火温度对0.4mm热镀锌Ti-IF钢板组织和性能的影响
Control of Running-off Strip in the Furnace of Galvanizing and Annealing Line of Panzhihua New Steel & Vanadium Co.,Ltd.
攀钢镀锌/退火两用机组的带钢跑偏控制
Effect of Annealing Treatment on the Texture and Stress of Ni-Fe Alloy Coating
退火处理对Ni-Fe合金镀层织构及应力的影响
Effects of Low Temperature Annealing on the Corrosion Resistance of Pulse Electrodeposited Nanocrystalline Ni Coatings
低温退火对电沉积纳米晶Ni镀层耐蚀性的影响
Introduction of Automatic System of Annealing Furnace of 2# Galvanization Line
唐钢2#镀锌线连续退火炉自动化控制系统
The effect of RTA process on optical and electrical characters of E-beam evaporated ITO films
快速热退火对电子束蒸镀的ITO膜光电特性影响
THE APPLICATION ANALYSIS OF THE COMBUSTION CONTROL ABOUT THE ANNEALER ON HOT DIP GALVANIZING LINE
镀锌生产线退火炉燃烧控制的应用分析
The temperature of reducing annealing furnace and molten zinc alloy in the pot is to be controlled by two-level distribution control with computer.
采用二级微机集散控制系统控制还原退火炉的炉温和镀锅的镀液温度。
ACCELERATED STRIPPING OF Ni-Fe/Cr OR Cu/Ni/Cr ELECTROPLATES
快速退除镍铁合金/铬、铜/镍/铬镀层新工艺的研究和应用
