The Research Development of Finite Element Simulation in Welding Joint;
焊接接头有限元模拟的研究进展
On Welding of Stainless Steel Compound Plate 16MnR+00Cr19Ni10;
16MnR+00Cr19Ni10不锈钢复合钢板的焊接
Heat source model for 2D welding temperature field simulation based on the configuration of welding line;
基于焊缝形状的二维焊接温度场模拟热源模型
Research on the welding performance of low-carbon nickel;
低碳镍材料焊接性能的研究
Weld Repair and Maintenance of the Steel Belts in the Rotary Belt Condensation Granulators;
回转带式冷凝造粒机钢带的焊接修复与维护
Cause Analysis of the Weld Flaw Between the Flanges and Internal Sleeves of the High Pressure Heat Exchangers and Countermeasures;
高压换热器法兰与内套焊接裂纹原因分析与对策
Application of ultrasonic jointing principle in needle destruction device;
超声波焊接原理在注射针头销毁器中的应用
Quality control in the process of assembling and jointing have interrupted francis turbine at Lijiaxia Hydropower Station;
李家峡水电站混流式水轮机分瓣转轮组合与焊接过程中的质量控制
This paper introduces the jointing method to recover the crushing equipment cone crusher whose axes are broken in two parts.
介绍了大型破碎设备圆锥破碎机主轴断裂后的焊接修复方法。
Optimized Soldering Process Research on Semi-rigid Cable Modules;
半刚电缆组件焊接工艺优化研究
The Soldering Research for 0.5 mm Pitch CSP;
0.5mm间距CSP焊接工艺研究
Discussion of Soldering Technology for Mix-assembled Circuit Board;
混装电路板焊接工艺技术探讨
Prediction system of CTOD for high strength pipeline steel welded joint based on back propagation artificial neural network;
基于BP人工神经网络的高强度管线钢焊接接头性能参数CTOD预测系统
Corrosion characteristics of welded joints of copper pipe in seawater;
紫铜海水管焊接部位在海水中的腐蚀特征
Corrosion behavior of welded joints of copper pipe in artificial seawater;
紫铜海水管焊接部位在人工海水中的腐蚀行为
TLP bonding joints with FeNiSiB filler, the microstructure and composition is closer to that of the parent metal than that with B.
研究了 2 0钢管 TL P连接接头的组织和性能 ,中间层合金选用 BNi2和 Fe Ni Si B非晶箔 ,在氩气保护下焊接。
Improvement on the bonding and sealing procedures of the sensing elements inpieloelectric angular rate sensor is introduced in this paper.
介绍了压电角速率传感器用敏感元件的焊接及密封工艺的改进。
Standard fatigue test and notch fatigue test of vacuum diffusion bonded 35CrMo steel joints are carried out according to two different bonding specifications.
对３５ＣｒＭｏ钢在采用两组焊接规范（真空度为４Ｐａ；焊接压力为５６ＭＰａ；焊接时间为１ｍｉｎ；焊接温度分别为８６０℃、９００℃）下获得的焊接接头进行了标准疲劳试验及缺口疲劳试验。
Butt welded 1;Butt welded 2;Butt welded 3;Butt welded 4
对接焊接 1;对接焊接 2;对接焊接 3;对接焊接 4
Welding agent is a kind of medicament that is used to help welding, and improve quality.
焊药是帮助焊接, 提高焊接质量的药剂。
Study on the Performance of TIG Welding Joint for 3.5Ni Steel
3.5Ni钢TIG焊焊接性能研究
creating a butt joint by welding.
通过焊接产生对接接头的焊接。
The joint formed by welding.
焊接点通过焊接形成的接合点
Study of Flux for Microelectronics Soldering and Microstructure of Solder Joint;
微电子焊接助焊剂及其焊点组织研究
Ceramic Cushion of Steel Pipe Weld Aided Device and Its Welding Procedure
钢管焊缝陶瓷垫补焊装置及焊接工艺
Welding of 16MnR+00Cr17Ni14Mo2 Composite Pipe
16MnR+00Cr17Ni14Mo2复合管焊接
ORS Over Reflow Soldering
再流回焊接，SMT元件的焊接方式
WS Wave Soldering
波峰焊接，THT元件的焊接方式
The union of two metal parts by welding.
焊接把两个金属部件焊接为一个整体
tinning the ends of the wires makes a better joint when you solder them.
当你焊接接口时，用锡焊很管用。
Study of Laser Welding of 400 MPa Super Steel and Its Weldability;
400MPa级超级钢激光焊接及其焊接性研究
New Globe-tube Soldering Techoology of Soldering Hollow Globe-Net-Shelf Struct ure;
焊接空心球网架结构球—管焊接新工艺
The Welding of Printed Board--On Teaching “Handwork” Welding Techniques;
印制板焊接——“手工”焊接技术教学
Optimization Study on Welding Sequence of the Hull Profile Butt Welding
船体型材对接焊的焊接顺序优化研究
Effect of Welding Angle on Fatigue Performance of Welded Structure
焊接角度对焊接结构疲劳性能的影响
All position pipe welding device for remote welding
用于遥控焊接的管道全位置焊接装置
