Contact Corrosion behaviors between aerial Titanium Alloy Fasteners and its jointed structure are studied, but also the corresponding control projects are presented by Standard Crevice Corrosion Test, Standard Galvanic Corrosion Test, Electrochemical Polarization Test, Neutral Salt Spray Test and Alternate Immersion Test, and by .
本文采用标准缝隙腐蚀试验、标准电偶腐蚀试验、电化学极化试验、中性盐雾试验以及周期浸润腐蚀试验，研究了航空用钛合金紧固件及其连接结构在模拟海洋环境下的接触腐蚀行为，通过扫描电镜、X射线衍射等分析方法，分析了腐蚀机理，同时提出了相应的接触腐蚀控制方案。
Application of zinc-nickel alloy coatings to fasteners in the ocean atmosphere environment;
锌镍合金镀层在海洋大气环境紧固件防护上的应用
The Way to Protect Fastener Surfaces for Motorcycle;
摩托车紧固件的表面防护技术
Development of Stress-wave Driving Apparatus for Interference-fit Fastener;
干涉配合紧固件的应力波安装仪研制
The join way of scraper coveyor cable pan using in mechanize working face is designed into fixtureless join way.
将机械化采煤工作面刮板输送机电缆槽之间的联接 ,设计成无紧固件的联接方式。
A working annex can be converted to a mini-hospital with tie-down hardware for a casket.
一个工作套间可转换成微型医院，其中装有固定灵柩用的金属紧固件。
Fasteners--Split pin holes and wireholes
GB/T5278-1985紧固件开口销孔和金属丝孔
lid guide, of base metal (excl. fasteners), for travel goods
盖子导向装置,贱金属制（不包括紧固件）,用于旅行物品
" Mechanical properties of fasteners--Bolts, screws, studs and nuts made of non-ferrous metals"
GB/T3098.10-1993紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母
Tighten needle bar connection screw 2 in needle bar connection 3 so that the marker line of the needle bar aligns with the bottom end of needle bar lower bushing 1 at the lowest position of the needle bar.
在针杆最下点，让针杆下金属部件1对准针杆的刻线，然后拧紧针杆套筒3紧固螺丝2。
This means 10) metal 11) brackets are 12) cemented to teeth.
意思就是把金属牙箍紧紧固定在牙齿上。
" Prevailing torque type hexagon nuts (with non-metallic insert), style 2"
GB/T6182-19862型非金属嵌件六角锁紧螺母
" Prevailing torque type hexagon nuts (with non-metallic insert),style 1"
GB/T889-19861型非金属嵌件六角锁紧螺母
fitting wire of base metal for securing corks of wine bottles
金属线配件,贱金属制,用于固定葡萄酒瓶塞
Metal parts or fixtures made bright by polishing.
发亮的金属部件擦得发亮的金属部件或固定装置
Prevailing torque type hexagon nuts with flange (with non-metallic insert)
GB/T6183-1986非金属嵌件六角法兰面锁紧螺母
A bar made of wood or metal that slides into a socket and is used to fasten doors and gates.
门闩，插销用木或金属制成的条，插入闩中用于固紧门
General rules of tightening for threaded fasteners
GB/T16823.2-1997螺纹紧固件紧固通则
lamppost of base metal whether or not fittedwith electric parts
灯杆贱金属制,不论是否用电器零件固定
Parallel Software Development on Temperature Field Simulation of Metal Solidification Process;
金属凝固过程温度场模拟并行软件开发
Simulation of curing process of composite component with internal metallic mold
带有金属内模的复合材料构件固化模拟研究
Effect of Heat Treatment Process on Microstructure and Properties of Ti Alloy for Fasteners
热处理工艺对紧固件用高强钛合金棒材的组织和性能的影响
cramp ,floor, of base metal
紧板铁马,贱金属制
