Each section is considered no lateral displacement and solved by the moment distribution method.
多高层建筑框架在竖向荷载作用下的内力近似分析时,通常采用分层法后按无侧移刚架用弯矩分配法求解。
A new moment distribution method is developed for high rise frames subjected to arbitrary vertical loads based on the conventional moment distribution method, and some examples are presented.
对于竖向荷载作用下的高层框架问题 ,在传统弯矩分配法的基础上导得了一种新的求解方法 ,并给出了算例 ,应用结果表明 ,所给出的新求解方法既便于手算 ,又便于编程电算 ,同时 ,高层框架不必分层就能求
The results of FEA method almost coincide with the ones of moment distribution method and provide more elaborate information.
对折板基础进行有限元分析，并与弯矩分配法计算结果进行比较，说明有限元方法与弯矩分配法的计算结果基本吻合，同时能提供更详尽的数据，是分析折板基础的可靠方法。
The conventional bending moment distribution method was adopted to solve the plate bending problem.
用传统的弯矩分配法求解任意荷载作用下的薄板弯曲问题,将杆端弯矩表示为多次分配弯矩和传递弯矩之和,得到了当分配传递次数无穷大时其表达式为公比小于1的无穷等比级数的和的形式,并求得了该和的表达式即极限公式。
Research on overturning moment distribution for multi-story masonry buildings with frame-shear wall structure in the first or first and second floor;
底框结构倾覆弯矩分配计算新方法
There are many shortcut methods in moment distribution.
在弯矩分配中有很多的简化法。
Barycentric interpolation collocation method for thin rectangular plates bending problems
重心插值配点法分析矩形薄板弯曲问题
Experimental Study and Analysis of Prestressed Subassemblage Concrete Frame on Moment Modification;
预压装配式预应力混凝土框架弯矩调幅实验研究与理论分析
Research on Flexural Behavior of Reactive Powder Concrete Rectangular Beam with Steel Bars;
活性粉末混凝土矩形截面配筋梁抗弯性能研究
RESEARCH ON NON-LINEAR MOMENT-CURVATURE OF UNBONDED POST-TENSIONED PRECAST CONCRETE BEAMS
无粘结预应力装配梁非线性弯矩曲率的研究
The Analysis of Moment Magnifier for Reinforced Concrete Arch Bridge;
钢筋混凝土拱桥弯矩增大系数的分析
On Bending of Functionally Graded Rectangular Plates with DQ Method
功能梯度矩形板弯曲分析的DQ方法
Boundary integration method of bending of thick rectangular plate with the corner paint hang in the air
角点悬空弯曲厚矩形板的边界积分法
Analysis of Moment-curvature Hysteresis Behavior of Composite Beams
组合梁截面弯矩—曲率滞回性能分析
Research on the Torque Distribution Characteristics of Dual-Turbine Torque Converter
双涡轮液力变矩器转矩分配特性研究
Interface Slip and Full Process Analysis of Double Steel-Concrete Composite Beam under Negative Bending;
钢－混凝土双面结合梁负弯矩区滑移及受弯全过程分析
Discussion about"Analysis of Correlation Curves between the Axial Force of Eccentrically Pressed Member with Rectangular Cross Section and the Bending Force Moment;
关于“矩形截面偏心受压构件轴力——弯矩相关曲线分析”的探讨
Virtual Work Method of Rectangular Two-Way Slab Considering Resistance Moment of Inclined Yield Line
考虑斜向塑性铰线抵抗弯矩的矩形双向板虚功分析法
Effects of Reinforcing Bar Amount on Bending-resistance Bearing Capacity of Single-side Reinforced Rectangular Beam
纵向钢筋配筋量对单筋矩形截面梁截面抗弯承载力的影响
Analysis of Connections of Slab to Edge Column under Shear and Unbalanced Moment
混凝土板柱边节点在剪力和弯矩作用下的分析
APPLICATION OF TRANSFER MATRIX METHOD FOR ANALYZING TORSION-BENDING-COUPLED VIBRATION OF SHIP HULL
迁移矩阵法在船体弯扭耦合振动分析中的应用
Study and Calculations of Capsizing Moment of Circumfluence on Ships in Curving Channels
弯道中环流对船舶产生的倾覆力矩计算分析
Out-of-Plane Bending Moment Analysis of the Plastic Limit for the Welded Piping Tee Containing Bottom Thinning Defects
底部减薄焊制三通的塑性极限面外弯矩分析
