In vitro flexural strength of provisional restorative materials;
暂时冠桥材料挠曲强度的体外研究
The influence of autoclave sterilization on elastic module and flexural strength of five types of posts;
高温高压消毒对五种桩挠曲强度与弹性模量的影响
Effect of ion exchange on the flexural strength and hardness of dental porcelain;
离子交换法处理对陶瓷挠曲强度和硬度的影响
In this study, sintered hydroxyapatite blocks were soaked in a cell suspension for a period, to make an investigation of the bending strength change of the hydroxyapatite blocks.
羟磷灰石烧结体试样浸入培养液或L细胞液中,分别放置1周和4周后进行挠曲强度试验。
crossbreaking strength
横断裂强度, 挠曲强度
testing methods for flexural strength of adhesives
胶粘剂粘结挠曲强度的试验方法
Aluminum borate whiskers modified by silane coupling agent to enhance bending force of PMMA
硅烷偶联剂用量对硼酸铝晶须增强PMMA挠曲强度影响的研究
The effect of whisker fraction on flexural strength of whisker-PMMA composite reinforced with potassium titanate whiskers
钛酸钾晶须的添加量对晶须增强PMMA挠曲强度影响
The Experimental Study of Different Processing Method for Transverse Strength of Denture Base Resins;
不同聚合方法对义齿基托树脂挠曲强度影响的实验研究
The effect of different dispersive methods on flexural strength nano-ZrO_2 reinforced denture polymethyl methacrylate
不同分散方法对纳米ZrO_2/PMMA复合材料挠曲强度的影响
Methods The flecture strength, hardness and shrinkage were compared in using microwave-cured and water bath-cured denture base resins.
方法采用微波能和水浴两种方法加热固化义齿基托树脂,进行挠曲强度、度和收缩率的对比分析。
flex cracking test
（涂层的）耐屈挠龟裂强度试验,挠曲疲劳试验
Strength Criteria in Semi-Analytical,Large Deflection Analysis of Stiffened Plates in Local and Global Bending
局部和整体弯曲下加劲板半解析大挠度分析中的强度标准
determination of flexural stiffness of fabrics:flexometer method
织物弯曲硬挺度的测定法: 挠度计法
Howerer, under heavy load the shaft may deflect excessively.
但是，在重载作用下，轴会发生过度挠曲。
Solution to the Large Deflection Problem of Thin Plates by BEM Method
用边界元法求解薄板大挠度弯曲问题
Finite element method based on complementary energy principle for large deflection of shallow beam
浅曲梁大挠度分析的余能有限元方法
Effect of Entrance/exit Leveler Roller' intermesh to Plate Flatness
辊式矫直过程中板带弯曲挠度的确定
Construction of Analytical Approximate Solutions to Buckling of Euler's Column with Large Deflection
Euler杆大挠度屈曲解析逼近解的构造
The Calculation Equation for Four-edged Rectangular Plates with Work Reciprocal Theorem of Bending Thin Plates with Large Deflections;
应用大挠度薄板功的互等定理求解四边固定矩形板的挠曲方程
" Adhesives, T peel strength test method for a flexible-to-flexible test specimen assembly"
GB/t2791-1995胶粘剂t剥离强度试验方法挠性材料对挠性材料
Find the value of the bending stress and the deflection at the center if the ribs are omitted.
如果略去肋条，求中心处的弯曲应力和挠度之值。
