Inversion of compression creep parameters of deep rock under rigid bearing plate
刚性承压板下深部岩体压缩蠕变参数反演
A new method to determine material creep parameters based flat cylindrical indentation test
平头压痕试验确定蠕变参数的一种新方法
With the indentation creep testing results in conjunction with finite element creep analysis, the material creep parameters (n'mI = nI =4.
通过压痕蠕变试验结合有限元的方法,确定了材料的蠕变参数,其中应力指数n'mI=nI=4。
The variation characteristics of the position of curved neutral layer and the relative creep function with time are studied systemically based on the rheological constitutive Burgers model.
基于Burgers流变本构模型,对岩层的中性层位置和相对蠕变函数随时间的变化特征进行了系统研究。
Based on indoor 1-D consolidation creep te st, a creep function reflec ting nonlinear creep character of soft soil has been set up, the character of re ference time is analyzed and the mathematical method for estimating the referenc e time is presented.
基于室内一维固结蠕变试验建立了反映软土非线性流变特性的蠕变函数 ,分析了参考时间的特性 ,并提出确定参考时间的数学方法。
For lack of material creep parameter in high temperature, an extrapolation based on experimental data is provided.
针对目前材料蠕变参数缺乏高温数据的情况,根据已有的实验数据对蠕变参数进行了外推,从而对铸坯的理想矫直微分方程进行了数值解析,从理论上阐明了固定辊连续矫直的辊列方案能够适应不同钢种、断面和拉速的浇铸。
In order to determine the creep parameters of DD3 single crystal alloy, a number of tensile creep tests were performed at 760℃ .
为确定ＤＤ３单晶合金蠕变参数，进行了多个拉伸蠕变试验，试验温度为７６０℃、８５０℃和９５０℃，试验应力为２００ＭＰａ至 ８００ ＭＰａ，试样取向为［００１」和［１１１］晶体取向。
Basd on the results of compressive creep, the creep model and creep parameter of rockmass are studied.
介绍了三峡船闸边坡现场岩体蠕变试验技术，在对试验成果进行整理分析的基础上，重点研究岩体蠕变模型和蠕变参数。
Determination of Creep Parameters of 80Au/20Sn Solder by Nanoindentation
纳米压痕试验确定80Au/20Sn焊料蠕变参数
RESEARCH ON CREEP PARAMETERS OPTIMIZATION OF SALT BED IN DEEP GAS STORAGE GROUP
深部储气库群盐层蠕变参数优化研究
The Study on the Method to Identificate Creep Parameter of High Rock-fill Dams and Its Application;
高堆石坝蠕变参数识别方法研究及其应用
Inversion of compression creep parameters of deep rock under rigid bearing plate
刚性承压板下深部岩体压缩蠕变参数反演
A new method to determine material creep parameters based flat cylindrical indentation test
平头压痕试验确定蠕变参数的一种新方法
The Compressive Creep Parameters Inversion Method of Complicated Rockmass and Its Application;
水电坝区复杂岩体压缩蠕变参数反演方法及其工程应用
Creep Experiment and Non-constant Viscoelastic Model of Rock
岩石蠕变实验及非定常参数粘弹模型
VARIABLE PARAMETERS-BASED CREEP DAMAGE CONSTITUTIVE MODEL AND ITS ENGINEERING APPLICATION
变参数蠕变损伤本构模型及其工程应用
Parameter Identification of Non-stationary Creep Equation of Rock;
岩石粘弹性非定常蠕变方程的参数辨识
Research on the creep effect and small signal parameters of microspeaker
微型扬声器蠕变效应与小信号参数研究
On the Test Track Evaluation Based on the Creep Rate Parameters
基于蠕变率参数的车辙试验评价指标研究
Parameter Identification of Creep Constitutive Model of Rock Based on Modified PSO Algorithm
基于改进PSO算法的岩石蠕变模型参数辨识
Nonlinear creep model of asphalt mixture and parameter determination
沥青混合料非线性蠕变模型及其参数确定
Study on the Creep Model & Its Parameter s Back Analysis by Finite Element Method of Creep Deformation and Their Application for High Rock-filled Embankment;
高填石路堤蠕变模型与参数反演分析及其应用研究
Back analysis of parameters and long-term settlement prediction of harbor soft ground considering its creep behavior
考虑蠕变性状的港区软土地基参数反演和长期沉降预测
A slow change in a characteristic of electronic equipment, such as a decrease in power with continued usage.
蠕变电子仪器的特性参数的缓慢变化，如由于连续使用而造成的功率下降
Study on the High-temperature Creep Behavior and the Estimation of Creep Crack Parameter C～* of Cracks in Bi-material CT Specimen;
双材料CT试样裂纹高温蠕变行为的研究与蠕变断裂参量C～*的估算
Creeping Strain Function of Leather in Lastometer Deformation
顶伸状态下皮革蠕变应变函数的研究
