Optimum Hopper Capacity Selection for TSHD Based on the Cost Calculation;
基于疏浚成本选择耙吸式挖泥船的最优仓容
To find the rule about the change of the mass center positions of a TSHD s draghead with time when working in different soil hardness of seabed under the function of swell compensator, a simulation model of TSHD is built based on a mathematical model, by using the software of ADAMS (Automated Dynamic Analysis of Mechanical Systems).
为研究耙吸式挖泥船(TSHD)在波浪补偿器作用下耙头质心位置在海床土壤硬度不同时随时间的变化规律,本文在建立波浪补偿器数学模型基础上,借助多体动力学仿真软件ADAMS,以某单耙TSHD为例,建立其疏浚过程动力学仿真模型。
Design study on large car-type system of cutter suction dredger;
大型绞吸式挖泥船台车系统的设计研究
Dynamic behavior and simulation system design of a cutter suction dredger;
绞吸式挖泥船疏浚动态特性与仿真系统设计
350 m~3/h (split type) cutter suction dredger;
350m~3/h(分体)绞吸式挖泥船
Design of a Small Dredging Simulator of Cutter Suction Dredger;
绞吸式挖泥船小型疏浚仿真器的设计
Calculation for Spud-lifting Force of Cutter Suction Dredger
绞吸式挖泥船定位桩拔桩力计算方法
Drag-suction dredger 3D view system
耙吸式挖泥船疏浚作业三维显示系统
Research on Optimization and Control of Dredging Operations for Cutter Suction Dredgers;
绞吸式挖泥船疏浚作业优化与控制研究
Modeling and Simulation of Dredging Process for Cutter Suction Dredger;
绞吸式挖泥船疏浚作业过程的建模与仿真
Study on the Load and Strength Analysis of Cutter Suction Dredger s Bridge;
绞吸式挖泥船绞刀架载荷计算和强度分析
Main Loads Analysis for Cutter Suction Dredger and Compilation of Calculation Software
绞吸式挖泥船主要载荷分析及计算软件开发
Design and Study of Cutter Suction Dredger's Spud-Carriage System
绞吸式挖泥船定位桩台车系统设计和研究
Bow-blowing Technology and Benefit Analysis of the Self-propelled Trailing Suction Hopper Dredger
自航耙吸式挖泥船艏吹施工工艺及效益分析
Discussion on the subdivision and towing safety of the non-self propelled cutter-suction dredger
非自航绞吸式挖泥船分舱与拖航安全性探讨
Designing & Simulation Experimental Study of Cleaning Silt Cutter with Environmental Protection for Cutter-suction Dredger;
绞吸式挖泥船环保清淤刀具的设计与模拟实验研究
Mathematical Model and Simulation System Design for the Dynamic Behavior of a Cutter Suction Dredger During Dredging;
绞吸式挖泥船疏浚动态特性数学模型建立与仿真系统设计
Cutter Suction Dredger Shaft Alignment and Vibration Calculating Analysis and Research
大型绞吸式挖泥船绞刀轴校中与振动计算分析研究
Study on the Structural Strength Evuluation and Standardization of Cutter Suction Dredger
绞吸式挖泥船的结构强度评估研究和标准化探讨
Cutting Force Calculation of the Cutter Suction Dredger Based on 2-D Soil-cutting theory
基于二维切削理论的绞吸式挖泥船绞刀头载荷分析
hydraulic dredging
用吸扬式挖泥船挖泥疏浚
bucket ladder dredger
链斗挖泥船斗式采泥器
Discussion and optimization of new-type dredging locating mode for cutter suction dredgers
绞吸挖泥船新型施工定位方式的探讨及优化
