Effect of plasticity index of saturated soft clay on its deformation parameters;
饱和软粘土的塑性指数对其压缩变形参数的影响
The article carries out the study and discussion only from improv- ing the soil plasticity index.
该文仅从改善土的塑性指数提高灰土抗裂性能进行研究与探讨,通过试验和应用已见成效。
On the expression of plastic index and the analysis of contact characteristics of rough surfaces considering the surface film and thermal effect;
考虑表面膜及热效应时粗糙表面的塑性指数和接触性能
According to systemic test of powdered fly ash's pl astic and liquid limits of different proportion and different mixing time, the s tudy show that the plastic index decrease as the increase of powdered fly ash co ntent and prolong of the mixing time.
对不同配比、不同混合时间的粉煤灰土的塑液限进行了系统测定,结果表明,随粉煤灰含量的增加,土的塑性指数减小;随时间的延长,土的塑液限减小;详细分析了粉煤灰对粘土的塑液限影响的机理。
The plastic index ψ were calculated in different contacts.
在此基础上计算了不同接触情况下的塑性指数ψ,其范围在4～15之间,所以渗硫面接触主要为塑性接触。
Effect of plasticity index of saturated soft clay on its deformation parameters
饱和软粘土的塑性指数对其压缩变形参数的影响
The test results indicate that clay dosage and plasticity index influence the water stability of asphalt mixture significantly.
试验结果表明:细集料中泥土质量分数与泥土塑性指数对沥青混合料水稳定性影响显著;
Effect of Cement-Mixed Pile to Reinforce Soft Soil with High Moisture Content and High-Plastic Exponent,and Its Applied Research
水泥搅拌桩对高含水量和高塑性指数软土的加固效果及其应用研究
Plastics--Determination of flammability by oxygen index
GB/T2406-1993塑料燃烧性能试验方法氧指数法
A Stock Price Plasticity Power Exponent Model Based on Material Distortion Theory;
一种基于材料形变理论的股价塑性幂指数模型
Strain Hardening Exponent Calculating Model for Transformation Induced Plasticity Steels
相变诱发塑性钢的应变硬化指数计算模型
Test method for flammability characteristics of glass fiber reinforced plastics using the oxygen index method
GB/T8924-1988玻璃纤维增强塑料燃烧性能试验方法氧指数法
indicative planning figure
指示性规划数字(指规数)
Elastoplastic modeling of unsaturated intact Q_2 loess with plastic work as hardening parameter
以塑性功为硬化参数的Q_2原状黄土弹塑性模拟
A Kid's Guide to Building Character.
孩子塑造性格指南》一书的作者。
Experiment and Numerical Simulation Research of the Injection Molding Characteristic for Thin-Wall Plastic Parts;
薄壁塑件注塑成型特性的试验与数值模拟研究
On the Strength ReductiOn Factor in Plastic Design of Steel Structures
关于钢结构塑性设计的强度折减系数
Methodology of numerical computation for elastoplastic deformation of clay
黏土弹塑性变形的数值模拟方法研究
Numerical Modeling of the Elastoplastic－Damage Constitutive Relations for Sand;
砂土弹塑性—损伤本构关系的数值建模
The study on the robust optimization designing method for the technical parameters of plastic forming processes
塑性成形工艺参数稳健优化设计方法
Investigation into Viscoelastic-Plastic Fracture Parameters of Asphalt Mixture
沥青混合料粘弹塑性断裂参数的研究
Compression Superplasticity of High Volume Fraction Carbide W6Mo5Cr4V2Al Steel
大体积分数碳化物钢W6Mo5Cr4V2Al的压缩超塑性
NUMERICAL ANALYSIS OF BEARING CAPACITY OF SUBSOIL WITH K_0≠1
K_0≠1时地基弹塑性承载力的数值分析
