The compensation method of the double posts vertical lathe crossbeam elastic deformation;
双柱立式车床横梁弹性变形的补偿方法
Precisely deriving the distribution of unit rolling force in cold strip rolling considering elastic deformation;
考虑轧件弹性变形时冷轧薄板轧制压力分布的精确求解
On uneven limited elastic deformation theory;
不均匀的有限弹性变形理论
Based on the method of equivalent electrical circuit, the paper calculates the intimate contact area and the bonding electrical current, taking into account elastic deformation of glass and two-dimensional roughness of the anode.
本文借助等效电路法 ,考虑玻璃弹性形变及阳极表面二维不平整度 ,计算了紧密接触面积和连接电流强度。
A model was proposed on the elastic deformation of silicon wafer contact in bonding.
提出了键合过程中硅片接触的一种弹性形变模型。
In this paper,considering the integrity tube under the external pressure from the elastic deformation and elastic-plastic deformation two stages,analysis and calculation on the destruction of the elastic-plastic deformation base on the Four-hinge mechanism.
本文从完整管体受外压发生弹性形变和弹塑性变形两个阶段考虑,在基于四铰链机构原理基础上对管体弹塑性破坏变形进行分析计算,得出完整管体的抗挤毁压力。
Function relation about elasticity deformation and energy absorbed by plate in the course of shot-peening process is established in the paper.
确立了喷丸加工板簧弹性变形能量和变形量的函数关系,分析了不同刚度型板进行喷丸加工时变形的成长过程,为典型的喷丸加工提供理论参考,从而能确定合适的工艺路线,达到设计的曲率要求。
Corresponding relation between the vibration of move mold and elastic distortion of toggles is discovered.
给出五点斜排双曲肘合模机构弹性动力学模型,对肘杆振动的理论计算值和实验结果进行了对比研究,对实测动模板三向振动值进行了小波分析,发现动模板振动与肘杆弹性变形间的对应关系,为减少合模时的振动、提高合模精度提供了依据。
In order to analysis the actual working state,elastic distortion is researched.
为了分析配气机构的实际工作情况,本文对配气机构的弹性变形进行了研究。
BEM for 3-D Elastic Deformation Analysis in a Cylindrical Helical Gear
圆柱斜齿轮三维弹性变形的边界元法
The Control Accuracy Research on Hydraulic Press with Elastic Deformation;
考虑弹性变形的液压机控制精度研究
The Influence of the Springy Deformation of Machine Structure on the Controlling System.;
机械结构弹性变形对控制系统的影响
Investigation on the Elastic Deformation of Roll System by Influence Function Method
关于轧辊弹性变形的影响函数法研究
A Study on Elastic Deformation Forecast Method for Precision Plastic Forming
精密塑性成形弹性变形量预测方法研究
The Influence of Elastic Deformation on Lubricating Characteristics of Conical Port Plate Pair of Axial Piston Pump
弹性变形对锥形配流副润滑特性的影响
Modification Method of Gear-Shaped Die Considering Elastic Deformation Behavior
考虑弹性变形行为的齿形凹模修正方法
Deformation in which stress and strain are proportional is called elastic deformation.
应力与应变成正比关系的形变称为弹性形变。
Blast-resistant properties of beams consisting of nonlinear elastic large deformation materials
非线性弹性大变形材料梁的抗爆特性
Resilience is the capacity of a material to absorb energy during elastic deformation.
弹性是指材料在弹性形变中吸收能量的能力。
Large Deformation Elastic-Plastic Analysis of Soil Stability by Finite Flement Method;
土体稳定性弹塑性大变形有限元分析
Fem Analysis of Elasto-Plastic Large Deformation on Slope Stability;
边坡稳定性弹塑性大变形有限元分析
Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation.
低渗透气藏孔隙变形具有弹塑性变形的特征。
Analysis to Large Deflections of Elastic Cantilever Beam with Constraint under Uniformly Distributed Load
均布载荷下变形受约束悬臂梁弹性大变形分析
An elastic body automatically restores itself after deformation.
弹性体变形后能自动复原。
Textured yarns that have been programmed for extraordinary extensibility are known as stretch yarns.
具有特别伸长性的变形纱称为弹丝。
Outside the strip zone, deformation is elastic.
在窄带区以外，变形是弹性的。
Methodology of numerical computation for elastoplastic deformation of clay
黏土弹塑性变形的数值模拟方法研究
