Three-dimensional thermo-elastic-plastic coupled finite element analysis for oblique cutting processes
斜角切削过程的三维热—弹塑性有限元分析
A mathematical model for numerical emulation of cutting forces in drilling using drills with indexable inserts based on oblique cutting theory combined with experimental approach is developed.
采用斜角切削理论和试验相结合的方法建立可转位浅孔钻钻削力数值仿真的数学模型。
Using the general international FEM software ANSYS, the dynamic process of oblique cutting is simulated.
借助于通用有限元软件ANSYS模拟出斜角切削的动态过程,并在此基础上对切削变形进行了研究,提出了一种获得剪切角的新方法。
The method of calculating well state parameters, such as the deviation azimuth and Pad No.
利用3维加速度计和3维磁通门的数据来计算测井或钻井时的井斜角、井斜方位角和仪器方位角等井的姿态参数已经相继在地层倾角测井仪、高精度连续测斜仪和随钻测量系统中得到了应用。
STUDY ON THE OBLIQUE CUTTING OF WOOD--The Relations Between Cutting Forces And Bevel Angles of Cutting Edge
关于木材斜角切削的研究——切削力与刃倾角的关系
The investigation of the distribution of stress inside a cutting tool in the chip flow plane during oblique cutting (II)
斜角切削切削刀具流屑平面内应力分布的实验研究(Ⅱ)
Three-dimensional thermo-elastic-plastic coupled finite element analysis for oblique cutting processes
斜角切削过程的三维热—弹塑性有限元分析
a sloping edge on a cutting tool.
切削工具上倾斜的边缘。
top plate cutting angle
顶片切削角 -锯链
bevel the edges of, to make a miter joint.
斜切边缘，使成斜角拼接。
The Relationship between the Average Shear Angle in Vibration Cutting and the Shear Angle in Conventional Cutting
振动切削平均剪切角和普通切削剪切角的关系
blade cutting anlge adjusting range
铲刀切削角调整范围
To bevel the edges of for joining with a miter joint.
将端边切成斜角拼接
give a sloping edge to(sth)
把（某物）切成或磨成斜边或斜角
Test and Research on the Cutting Force Change Caused by Cutting Angle Diversification of the Blade of Salix-Psammophila Chipper;
沙柳削片机飞刀切削角对切削力影响的试验研究
PREDICTION OF THE CUTTING FORCE IN END MILLING OF DIFFICULT-TO-MACHINE MATERIAL POCKETS
难加工材料型腔圆角数控铣削的切削力预测
Programming Method of Milling of Chamfer and Fillet Based on $TC_DP
基于＄TC_DP铣削斜面及倒圆角的程序编制方法
Angle cutter: Machine for cutting paper at an angle to the machine direction of the paper.
斜切裁纸刀:能把纸张斜切的机器。它的切线与纸纹方向成一角度。
Experimental Study of Epikeratophakia Lathing at Room Temperature
室温下切削表面角膜镜片的实验研究
Decentered ablation of excimer laser in corneal refractive surgery
准分子激光角膜屈光手术偏中心切削
Study on Rock Breaking Regulation in Optimizing Cutting Angle of PDC Bit
PDC钻头切削齿切削角度对破岩效果影响规律的研究
Numerical Simulation of Metal Orthogonal Cutting Based on Different Tool Rake Angles
基于不同刀具前角金属直角切削的数值模拟
