Calculation of material damping of reinforced concrete cantilever beams;
钢筋混凝土悬臂梁材料阻尼值计算
Single modal parametric resonances in axially narrow-band random oscillating slender cantilever beams;
轴向窄带随机激励悬臂梁的单模态参激共振
Vibration control of cantilever beams with piezoelectric intelligent materials;
压电智能材料在悬臂梁结构振动控制中的应用
Applying Micro-electroplating Technology to Fabricate Ni-cantilever;
利用微电铸制作镍悬臂梁
Different Loading Mode Impacting On The Spring Constant Of Microcantilever;
不同加载方式对微悬臂梁弹性系数的影响
Application of AFM-based Cantilever with Micro-probe;
基于原子力显微镜的悬臂梁微尖端器件应用新进展
Based on the field surveys about the cantilever beams of the "CPOE5" oil-drilling platform,dangerous stress areas are determined.
在对"中油海5"钻井平台悬臂梁实地勘测的基础上,确定危险应力区。
This paper performed a flexural test of 6 full-scale continuous beams and 2 full-scale cantilever beams with development lengths of negative reinforcements in two batches.
本文完成了负弯矩钢筋分两批切断的六根足尺约束梁和两根足尺悬臂梁的弯曲破坏试验。
Piezoelectric cantilever beams is of important basis to vibration energy harvesting and the structure parameters greatly affect its electric output and resonant frequencies,so it is needed to be designed optimally.
该文针对悬臂梁压电振子结构,采用ANSYS有限元建模方法,进行了静力学及模态仿真分析。
Study on active control for cantilever girder vibration;
基于悬臂梁振动的主动控制技术研究
In order to measure the deflection of girder more accurately, strain-sensor is presented to measure the deflection of some typical cantilever girders.
挠度变形是工程梁设计中的一项重要指标,为了更加准确地测量梁的挠度变形,提出了采用应变式传感器进行挠度测量的方法对几种典型的悬臂梁的挠度进行测量,该方法是利用挠度与外载荷(外力偶)、弯矩与应力、应力应变之间的关系,导出梁的挠度与应变之间的关系,从而由测得的应变得出悬臂梁在外载荷作用下的挠度。
cantilever beam impact tester
悬臂梁式冲击试验机
rotating cantilever beam type machine
旋转悬臂梁式试验机
uniform cantilever beam
等截面悬臂梁，等截面外伸梁
A Micromechanical Cantilever Magnetic Field Sensor and the Resonat Cantilever Electromagnetic Exciting Technique;
MEMS悬臂梁磁场传感器与谐振悬臂梁电磁驱动技术
Plastics--Determination of izod impact strength
GB/T1843-1996塑料悬臂梁冲击试验方法
method of izod impact test for rigid plastics
硬质塑料悬臂梁冲击试验方法
The structure consists basically of two cantilever beams.
这种结构基本上由两根悬臂梁组成。
Force-measuring elements employ either a cantilever beam or a column arrangement.
测力元件采用悬臂梁或柱的形式。
Research of Active Vibration Control of Cantilever Beam;
基于悬臂梁振动的主动控制技术研究
Study on the Quality Factor Control Technology of the Microcantilever;
微悬臂梁品质因数Q控制技术的研究
Optimal Placement and Vibration Control of Intelligent Cantilever Beam;
智能悬臂梁的振动控制及其优化配置
The Design and Fabrication Technology of MEMS Cantilever Probe Card;
悬臂梁式MEMS探卡的设计和制造技术
DYNAMIC ANALYSIS OF CANTILEVER WHEN SUFFERRED FROM HEAVY OBJECT SHOCK
重物冲击下悬臂梁动力响应的能量法
Structure characteristics of foreign cantilever beams of the jack-up drilling platform
国外自升式悬臂梁钻井平台结构特点
Amplify Method of Quality Factor of Micro Cantilever Based on FPGA
基于FPGA的悬臂梁品质因数提高方法
Active Vibration Control of Piezoelectric Cantilever Beam by the LQR
含压电片悬臂梁的LQR振动主动控制
Research on natural frequency of cantilever beam based on LabVIEW
基于LabVIEW的悬臂梁固有频率测试研究
Application of Bracket with Double-cantilevers Longitudinal Beam in 0# Block of Cantilever Perfusion Beam
牛腿双悬臂纵梁用于悬灌梁0#块支架的研究
