Correlation between welding slag and usability quality of stainless steel electrode;
不锈钢焊条焊接熔渣及与焊条工艺质量的关系
Analysis and control of hydrogen in electroslag refining process;
电渣重熔过程中氢行为的分析及控制
A lot of tests and analyses show H13 steel made by the craftwork of EAF_LF,VD refining_steel ingot_electroslag refining_forging boasts fine quality.
介绍了莱钢研究开发高品质H13热作模具钢的过程,采用电炉→LF、VD精炼→钢锭→电渣重熔→锻造工艺生产的H13钢在做了大量检验分析后,质量性能优良。
Method of controlling solidification quality in electroslag remelting process;
电渣重熔过程中金属凝固的控制方法
An Analysis on Formation of ANF-6 Electroslag Fluxes Skin of Electroslag Remelting Ingot;
电渣重熔锭ANF-6熔渣渣皮形成的分析
Effect of Modulating Remelting Power on Pool Depth of Electroslag Remelting;
调整功率对电渣重熔(ESR)熔池深度的影响
Simulation analysis of carbon steel microstructure in the electroslag casting process;
电渣熔铸钢锭微观组织的模拟
The flow of the molten slag pool determines the temperature distribution and the pool profiles in the electroslag casting process,which affects the quality of ingot casting.
电渣熔铸过程中熔渣的流动决定了熔铸体系温度场的分布以及金属熔池的形状,最终影响熔铸钢锭的质量。
Electroslag casting is a casting method that makes the self-consumable electrode melt in the high temperature slag bath by strong current.
电渣熔铸是一种利用大电流通过渣池区域而产生的高温将自耗电极逐渐熔化的方法,其中渣池的温度分布特点直接决定电极的熔化速度、提纯度以及铸锭的组织结构等,是熔铸系统中的关键区域。
Entirely Sealed-in Argon Atmosphere Electro-Slag Remelting Superalloy GH4169;
全封闭Ar气保护电渣重熔GH4169合金
A high precision time-various model is obtained by system identification of electro-slag remelting process.
采用递推的带遗忘因子的最小二乘方法,以现场测得的熔炼电流为输入,实际熔化率为模型输出,对电渣重熔过程进行辨识,得到了精度较高的系统时变模型,并证明了模型的可靠性。
In this article,mechanism of burn-up content of titanium during electro-slag remelting in steel 2Cr18Ni11Ti and factors which influence burn-up content of titanium were analyzed.
本文分析了电渣重熔2Cr18Ni11Ti过程中[Ti]的烧损机理与影响[Ti]烧损的因素,提出了根据自耗电极[Ti]含量灵活制定相应的电渣重熔工艺。
MATHEMATICAL MODELLING OF SLAG FLOW FIELD IN ESR SYSTEM
电渣重熔体系内熔渣流场的数学模拟
STUDY ON USE OF HIGH RESISTANCE SLAG IN ESR PROCESS FOR PRODUCING HIGH SPEED STEEL
采用高电阻渣电渣重熔高速钢的研究
Response of Slag Temperature to Power Input in ESR System
电渣重熔系统渣温对输入功率的响应
The ESR process consists of three stages: 1) Formation of dropets on the electrode tip;
电渣重熔有三个阶段:1.电极端头熔滴形成期;
Dynamic Simulation on Electro-Capillary Oscillation in ESR System
电渣重熔体系电毛细振荡的动态模拟
ANALYSIS OF SLAG BATH FLOW AND DEVELOPMENTOT MATHEMATICAL MODEL IN ESR SYSTEM
电渣重熔体系渣池运动分析及数学模型发展
Mathematical Model of Heat Generation Distribution in ESR Bath
电渣重熔系统渣池发热分布的数学模型
Calculation of Radiative Heat-Transfer above Free Slag Surface in ESR Process
电渣重熔过程渣面以上辐射传热的理论计算
Problems on Design of CaF_2-Free Slag Systems for Electroslag Remelting
电渣重熔用无氟渣系设计中的一些问题
Analysis on Factors Influencing Slag Flow in ESR System
电渣重熔体系影响渣池运动因素的解析
Mathematical Modelling for the Shape of Metallic Bath in ESR Process
电渣重熔过程中金属熔池形状的数学模拟
A PRACTICAL METHOD TO MEASURE THE REMELT BATH DEPTH IN ESR
电渣重熔金属熔池深度的实用测定方法
Test methods for electro-slag remelting furnaces
GB/T1020-1989电渣重熔炉的试验方法
Study and Application on Intelligent Control of the ESR Process
电渣重熔过程智能控制的研究与应用
INFLUENCE OF INOCULANT ON STRUCTURE OF HIGH SPEED STEEL PRODUCED BY ESR
孕育剂对电渣重熔高速钢组织的影响
HEAT BALANCE AND SOLIDIFICATION IN ESR USING HIGH FILL RATIO
大充填比电渣重熔热平衡与凝固研究
Effect of ESR on Cryogenic Toughness of Austenitic Steel
电渣重熔对奥氏体钢低温韧性的影响
Improvement of Consarc ESR Furnace Control System
康萨克电渣重熔炉自动控制系统改造
