"fine grain + directionally solidification + heat isothermal process" were performed for achievement of the prevent.
在弯曲共振无法避免的情况下 ,从提高动力涡轮叶片的疲劳抗力入手 ,采用细晶 +方向性凝固 +热等静压的复合成型工艺 ,成功地解决了这一故
The asymptotic analysis of interfacial stability with surface tension anisotropy for directional solidification of alloys;
各向异性作用下合金定向凝固界面稳定性的渐近分析
Effect of Al-Cu alloys diameter on thermal gradient and primary dendrite arm spacing during directional solidification;
试样直径对Al-Cu合金定向凝固温度梯度和一次枝晶间距的影响
Study of the TiNi shape memory alloy prepared through directional solidification;
定向凝固制备TiNi形状记忆合金的研究
Effect of gas pressure on pore distribution of lotus-type porous magnesium fabricated by unidirectional solidification;
气压对定向凝固藕状多孔镁的气孔分布影响
Relationship between primary dendrite arm spacing of Al-4.5%Cu alloy and withdrawal rate during unidirectional solidification;
定向凝固Al-4.5%Cu合金枝晶组织与抽拉速率的关系
Fabrication of YBCO superconducting rods by unidirectional solidification;
定向凝固法制备YBCO超导棒材研究
Production of H90-steel-H90 clad coil by inversion solidification;
反向凝固法生产H90-钢-H90复合带
Microstructure and Properties of H90 steel Cladding Strip in Inversion Solidification;
H90/钢反向凝固复合带的组织与性能
SOLIDIFICATION PHASE SELECTION IN DIRECTIONALLY SOLIDIFIED Ti-(44%-54%)Al ALLOYS
定向凝固Ti-(44%—54%)Al合金的凝固相选择
The Effect of Directional Solidification on Macrograph Structure of AZ31 Mg Alloy
定向凝固对AZ31镁合金凝固组织的影响
Numerical Simulation of the Process of Vertical and Directional Solidification of Large-size Steel Ingot;
大型垂直定向凝固钢锭凝固过程数值模拟
PREPARATION OF ORIENTED POROUS CERAMICS BY DIRECTIONAL SOLIDIFICATION AND FREEZE-DRYING METHOD
定向凝固和冷冻干燥制备定向多孔陶瓷
A Study of Temperature Gradient in Liquid Phase for Double-zone Heat Directional Solidification
双区加热定向凝固液相温度梯度研究
Microstructure and Phase Selection in the Unidirectional Solidification of Zn-Cu Peritectic Alloy;
Zn-Cu包晶合金定向凝固组织及相选择
The Simulation of Al-1.96%molCu Binary Alloy during Directional Solidification;
Al-1.96%molCu合金定向凝固数值模拟
A Study on the Microstructure and Properties of AZ31 Magnesium Alloy Produced by Directional Solidification;
定向凝固AZ31镁合金的组织与性能研究
Phase-field Simulation of Binary Alloy during Directional Solidification;
二元合金定向凝固的相场法数值模拟
Crystal Growth Mechanism and Orientation Control of YBCO Superconductors Prepared by Unidirectional Solidifucation Method;
YBCO定向凝固过程中的晶体生长与控制
Research on the Directionally Solidified Microstructure of Cu-Sn Peritectic Alloys;
Cu-Sn包晶合金定向凝固组织研究
Microstructure of NdFeB Permanent Magnets under Directional Solidification;
NdFeB永磁材料定向凝固组织研究
Structures and Properties of Ti46Al0.5Si0.5W Billets Directionally Solidified with Cold Crucible;
冷坩埚定向凝固Ti46Al0.5Si0.5W扁坯的组织与性能
Research on the Unidirectional Solidification Microstructure and Property of Al-4.5%Cu Alloy;
Al-4.5%Cu合金定向凝固组织与性能研究
Directional Solidification γ-TiAl Shot Peening Process
定向凝固γ-TiAl板坯喷丸工艺研究
Simulation of directional solidification of LNGT72 alloy by FEM
LNGT72定向凝固的有限元模拟
Structure of Directional Solidification of High Niobium Containing TiAl Alloy
高Nb-TiAl合金定向凝固组织的研究
Growth Behavior of SCN-5% Ethanol Model Alloy in Ultrasonic Vibration
超声作用下模型合金的定向凝固行为
