It is identified that a new bulk amorphous alloy with the largest supercooled liquid region TX of 100 K was obtaine.
用铜模铸造方法制备了不同尺寸的Zr55Al10Cu30Ni5-xPdx(x=0,1,3,5)块状非晶合金,采用X射线衍射(XRD)、扫描差热分析(DSC)和透射电镜(TEM)分别对Zr55A110Cu30Ni5-xPdx块状非晶样品的结构、热稳定性和微观组织进行了研究。
The paper was based on preparing the bulk amorphous alloy and testing it's friction and wear property in Cu-Zr-Al system, the process of preparing the bulk amorphous alloy by magnetic levitation melting - copper modle suction method was studied ,what was more, prepared the metallic ,glass matrix composites by unidirectional solidification.
本文以Cu—Zr—Al系块状非晶的制备及其摩擦磨损性能研究为背景，对磁悬浮—铜模吸铸法制备块体非晶作了研究，并用定向凝固法制备了非晶基自生复合材料。
The bulk metallic glasses (BMGs) have been found only through trial-and-error methods according to some empirical rulesand quantitative criteria have been practically absent.
90年代出现的块状非晶合金以其独特的性能引起了人们对非晶研究的更大兴趣。
Each other lumplike anything small and roundish of structure, reduction with oxide surrounding feeling and GTO′s law material desulphurization the being in progress trial in mine in accordance with the high sulphur manganese mine is studied, and indicates at last: the high sulphur manganese desulphurization effect of mine not only relates with desulphurizati.
针对高硫锰矿的矿相结构、还原和氧化气氛及GTO法块状颗粒料脱硫进行了试验研究,结果表明:高硫锰矿的脱硫效果不仅与脱硫工艺方法及温度有关,而且还与某一高温下的停留时间有关,采用GTO法脱硫,突破了国内外利用高硫锰矿块状物(8～40mm)进行脱除高S的瓶颈,取得了突破性的脱硫效果,GTO法脱硫率达91 88%,达到了富锰渣高炉冶炼的入炉要求。
Fabraction of Cu-based Bulk Metallic Glasses and Research on It's Friction and Wear Property;
铜基块状非晶的制备及其摩擦磨损性能研究
Fabraction of Cu-based Bulk Metal Glasses and Research on Corrosion;
铜基块状非晶的制备和腐蚀性能的研究
The Research on Structure and Mechanical Property Structure of Cu-based Bulk Amorphous Alloy;
Cu基块状非晶的微观组织和力学性能研究
Fabrication of Cu-based Bulk Metallic Glasses of Micro-alloying and Research on It s Mechanical Property;
微合金化铜基块状非晶的制备及力学性能的研究
Ultrasonic Nondestructive Evaluation of Elastic Properties for Cu-Zr-Al System Cu-based Bulk Metallic Glasses;
Cu-Zr-Al系Cu基块状非晶合金弹性性能超声无损评价
Preparation and Properties of Quaternary Fe-B-Nb-Y(Er) Bulk Metallic Glasses
四元Fe-B-Nb-Y（Er）块状非晶合金的制备及性能研究
Research Progress of Copper-based Amorphous Bulk Composites with W-WC Hybrid Reinforcers
W-WC混杂增强铜基块状非晶复合材料的研究进展
The Effect of Alloying Elements Addition on the Glass Forming Ability and Corrosion Resistant Properties of Cu-based Bulk Metallic Glasses;
合金元素的添加对铜基块状非晶合金玻璃形成能力及耐腐蚀性能的影响
Current Study and Development on Friction and Wear Performances of Bulk Amorphous Alloy
大块非晶合金摩擦磨损性能研究现状与发展
Microstructure and Hardness of Laser Melted Layer on Bulk Cu_(60)Zr_(30)Ti_(10) Amorphous Alloy
块状Cu_(60)Zr_(30)Ti_(10)非晶合金激光熔凝层的组织和硬度
The Effects of Crystallization on the Correlated Properties in Some Bulk Metallic Glasses (BMGs);
大块非晶及其晶化后相关性能的研究
Study on the Preparation and Crystallization of Mg-based Bulk Amorphous Alloys;
镁基大块非晶合金的制备及晶化研究
Crystallization and Mechanical Property of Cu-Zr-Based Bulk Metallic Glass;
铜锆基大块非晶合金晶化及力学性能
Isothermal Crystallization Kinetics and Behavior of NiTiZrAlCuSi Bulk Metallic Glass;
NiTiZrAlCuSi块体非晶合金等温晶化动力学及晶化行为
Magnetic Property and Crystallinzation Behavior for Ferromagnetic Bulk Amorphous Alloys;
铁磁性块体非晶合金磁性和晶化行为的研究
Study on the Preparation and Crystallization of Mg-based Bulk Amorphous Alloys with Low T_g;
低T_g镁基块体非晶合金的制备及晶化研究
Study on the Crystallization Behavior of Mg-based Bulk Amorphous Alloy and Preparation of Amorphous Matrix Composites;
镁基块体非晶晶化行为研究及复合材料制备
Glass Forming, Crystallization and Mechanical Property of CuZrAl and CuZrAlAg BMG;
CuZrAl、CuZrAlAg大块非晶合金形成、晶化及力学性能
