stretch blow molding是什么意思

用法例句

In the numerical simulation of PET stretch blow molding,the material constitutive model had a great significant effect on the simulation result.

在PET拉伸吹塑的数值模拟中,采用何种本构方程来反映材料的应力-应变行为对于模拟结果的准确性有着重要的影响。

Preform growth mode in injection stretch blow molding (ISBM) has great influence on the quality of formed bottle.

在型坯再加热条件不变的情况下,通过全透明模具和数码摄像机研究了两步法拉伸吹塑中拉伸与吹气的时序(即预吹气延迟时间t0)对型坯拉伸吹胀模式的影响。

The relative theories about stretch blow molding are introduced.

介绍了拉伸吹塑的相关理论。

On the basis of the analysis of the thermoforming and blow moulding mechanism, the mathematical model was established to simulate the plastic thermoforming and blow moulding process.

在分析热成型和吹塑成型的机理基础上 ,建立了描述塑料热成型和吹塑成型过程的数学模型 ,在分析中 ,聚合物膨胀过程看作是超弹性类似于完全橡胶体的变形 ,材料模型采用Ogden和Mooney_Rivlin超弹性模型 ,在数值分析中 ,采用了薄膜单元 ,控制方程采用La grangian描述 ,应变描述采用Green变形张量 ,应力描述采用二阶Piola_Kirchoff应力张量。

This paper preliminarily analyses the process parameters of blow moulding, using the method of injection flow analysis, the computer simulation method of blow moulding is put forward to optimize the process parameters.

通过对吹塑成型工艺参数的分析 ,结合注塑流动分析方法 ,初步提出了一个用于优化吹塑工艺参数的计算机模拟模式。

The FEM simulation software KMAS developed in the car-body & mould institute of Jilin University was used to simulate the process of hemisphere blow moulding of 6 mm PC, and the simulated results was compared with data obtained by traditional moulding experiments.

利用吉林大学研制的车身与模具技术研究所开发的KMAS有限元模拟软件对6mm厚的聚碳酸酯板材的半球吹塑成型过程进行数值模拟计算,同时通过成型试验所得数据与模拟结果进行对比发现,半球高度值吻合良好,其误差点出现在成型边缘固定区域;半球厚度主要误差出现在制件的顶部,最大误差达到14。

The methods and the control factors of the blow molding as well as new development are discussed.

介绍吹塑成型方法、吹塑成型控制因素及吹塑成型的新进展,讨论吹塑制品质量的影响因素和常见制品缺陷的改进方法。

This paper introduces some uses and trends of computer simulation technology in plastics processing, especially in extrusion molding, blow molding and thermoforming.

介绍挤出成型、吹塑成型和热成型及其它成型方式的数值模拟技术,阐述了目前存在的问题和发展趋势。

The master communicates with the slave through RS 232C asynchronous series communication interface to realize logical sequence control of extrusion process, control of parison shape and thickness, control of hollow plastic container blow molding,etc.

用４８６微机作上位机、可编程控制器（ＰｒｏｇｒａｍｍａｂｌｅＣｏｎｔｒｏｌｅｒ，以下简称ＰＣ）作下位机建立两级控制系统，并通过ＲＳ—２３２Ｃ异步串行通讯接口连接上下位机，实现了挤出过程逻辑程控和型坯形状、壁厚控制以及中空塑料容器吹胀成型控制；介绍了中空吹塑成型的基本原理、控制系统构成、间隙式型坯壁厚控制器结构，并给出了上下位机串行通讯程序流程；对软硬件设计、调试和系统可扩展性进行了讨论。

DIE DESIGN AND PROCESS OF EXTRUSION BLOW MOLDING FOR PLASTIC FUEL TANK

塑料油箱挤出吹塑成型工艺与模具设计

For blow molding, melt temperatures of160° C to220° C are recommended.

吹塑成型的推荐熔化温度在160到220度之间。

Stress-strain analysis on variable radius section in revolving packing container blowing

回转包装容器吹塑成型变径部分应力应变分析

Numerical Analysis of blowing mold for the revolving axis container based on CAE simulation

基于CAE技术的具有回转轴线容器件吹塑成型时的数值分析

Research and Design of Fuzzy Controller for Blank Moulding of Plastic Blower;

吹塑机坯成型模糊控制器的研究与设计

Design of the Hydraulic System of IB02-100 Automatic Injection-blowing Plastic Bottle Forming Machine

IB02-100型全自动塑料瓶注吹成形机液压系统设计

Developing and Design on the Electronic-Hydraulic System of the High Efficiency and Saving Energy Plastic Hollow Shapping Machine;

高效节能挤出吹塑中空成型机电液系统开发与设计

The Design and Application of PLC Servo System in the Injection-Blowing Hollow Plastic Moulding Machine

PLC伺服系统在注-吹塑料中空成型机上的设计和应用

The structure design of an opening mould for a full-automatic bottle-blowing machine in one-time injection blow molding by the modification of a general injection machine is introduced.

介绍用注塑机改装的注吹一次成型全自动吹瓶机开边模部件的结构设计。

STUDY ON PARISON SWELL OF MODIFIED PVA IN EXTRUSION BLOW MOLDING

改性聚乙烯醇挤出吹塑型坯膨胀研究

Study on Design and Optimization Techniques of Parison Thickness for Extrusion Blow Molding

中空挤出吹塑型坯壁厚设计与优化技术研究

Forming Die for Titanium Alloy Superplastic Bulging and the Equistrength Criterion for Die Design

钛合金超塑性吹塑成形模具及等强度模具设计准则

blowing machine for working glass (excl. hand-type blowers and blowpipes)

玻璃加工用吹塑机（手工吹塑机和吹管除外）

plastic product hydraulic moulding press

塑料制品液压成型机

horizontal plastic injection moulding machine

卧式塑料喷射成型机

Study on the Fusible Core Technique of Thermoplastic Plastics Injection Molding;

热塑性塑料注射成型中的可熔型芯技术研究

The Causes and Prediction of Quality Defects for the Micro Injection Molding Parts

微小体积塑件注塑成型质量缺陷的成因与预测

The policeman ask me to blow Into a plastic bag

警察要我吹一下塑料袋