Control of fixed length and flatness of aluminum plates produced by 1500 transverse cutting machine
1500横切机剪切铝板的定尺和平直度控制
The texture of hot rolled aluminum plate was measured on decorticated sample by X-ray reflection technique as well as by X-ray transmission technique, in which a 90°coordinate rotation around rolling direction is requested.
对热轧铝板的织构进行了X射线反射法剥层测量和X射线透射法直接测量。
To solve the problem,the non-stationary characteristics of guided waves were studied,the theory of STFT(short-time Fourier transform) was introduced,the STFT and time-frequency spectrum analysis were applied to the signal interpretation of guided waves propagating in an aluminum plate and a honeyc.
为了解决这一问题,研究了导波信号的非平稳特征,介绍了短时傅里叶变换(STFT,Short-Time Fourier Transform)时频分析原理,分别对铝板试样和蜂窝板试样内传播的导波信号进行了STFT和时频谱分析,得出了铝板内导波信号中各频率成分随时间的变化情况,分析出导波信号的模式转换现象,比较精确地计算了导波的群速度;对于蜂窝板内的导波信号,由于能量泄露比较严重,当激励频率为1。
Coupling of FEM with Monte Carlo for simulating recrystallization in cold rolling pure aluminum sheet;
有限元与Monte Carlo方法耦合的冷轧纯铝板再结晶模拟
Influence of amino silane coupling agent on lap shear deformation of adhesioned aluminum sheet/polypropylene;
氨基硅烷偶联剂对铝板/聚丙烯粘接件拉伸剪切变形的影响
Influence of texture in 3104 Aluminum sheet on r values and deep drawing property;
3104铝板织构对r值及深冲性能的影响
By Comparing the effects of different materials and production technologies on the bending performance of aluminium plates used in aluminium-plastic composite boards, the author found out the optimum materials and production technologies favourable for improving the bending performance of aluminium-plastic board.
对比了不同材料、不同生产工艺对铝塑复合板用铝板弯曲性能的影响 ,通过生产实践找到了提高铝塑复合板弯曲性能的最佳材料和生产工艺。
The effects on anodization coloring of coloring of commercial aluminium plate are discussed from grain size, composition, gases and dregs of cast-rolling plate.
论述了铸轧板晶粒度、化学成分、气体、夹渣含量对工业纯铝板着色性能的影响，提出了改善铸轧板质量进而减小着色色差的方法。
The effects of cutting speed and aided oxygen pressure on the cutting quality and the adhesive slag quantity were analysed in the experiment of cutting of aluminium plate by CO2 laser.
在CO2激光切割铝面板的试验中，分析了切割速度和辅助氧压对切割质量及熔渣附着量的影响；解决了工件逆反射的难题；获得了激光切割铝板的较佳工艺参数。
The microstructures and textures during recrystallization process in the aluminium sheet which had been longitudinally and transversely rolled were investigated.
利用电子显微分析（TE）和ODF织均分析，研究了纵横轧制铝板再结晶退火前后的织构和再结晶过程。
Welding Process of H69 Copper-plate and 6063 Aluminium-plate
H69铜板与6063铝板的焊接工艺
A lead plate crosses the chamber and evidently the particle has passed through it.
一块铝板横放在云室中，显然有粒子穿过铅板。
Compensating Decoupling Strategy of Setting Strip Gauge and Flatness of Aluminous Board Timber
铝板带材厚度和板形设定补偿解耦控制策略
Aluminium bronze sheet
GB/T2043-1989铝青铜板
Wettability of Al/Al_2O_3 system and direct aluminum bonded substrates
铝和氧化铝的润湿性及氧化铝陶瓷敷铝基板
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
Aluminium-plastic composite panel
GB/T17748-1999铝塑复合板
aluminium alloy integrally extruded panel
铝合金整体挤压壁板
Aluminium and aluminium alloy corrugated sheets
GB/T4438-1984铝及铝合金波纹板
Aluminium and aluminium alloy rolled sheet
GB/T3880-1997铝及铝合金轧制板材
Wrought aluminium and aluminium alloy-Patterned sheet
GB/T3618-1989铝及铝合金花纹板
Sheet glass mirror, float glass mirror, silvered mirror and car mirrors.
平板铝镜、浮法铝镜、镀银镜、汽车倒视镜。
The institute of the aluminum tubes and the aluminum tubes board expansion quality
对影响铝管和铝管板胀接质量的研究
Anti-blasting Performance of Aluminum Foam Sandwich Beam with Stainless Steel Face Sheet and with Aluminum Face Sheet
不锈钢面板与铝面板泡沫铝夹芯梁的抗爆性能
The cleaning and maintaining of aluminum plastic composite panel & aluminum panel curtain
铝塑复合板、铝单板幕墙材料清洗与维护
Wrought aluminium and aluminium alloy sheets and strips--Tolerances on form and dimensions
GB/T3194-1998铝及铝合金板、带材的尺寸允许偏差
Design and Research on Engineering of High Precision Aluminum and Aluminum Alloy Plate, Sheet and Strip;
高精度铝及铝合金板带材工程设计与研究
Study on Aluminizing and Al-Si Co-Infiltration on Ti-Alloy Fabracated by EB-PVD;
EB-PVD制备钛合金薄板渗铝及铝硅共渗研究
