A Research on Optimized Mill Track in Milling Process and Simulation Based on STEP-NC;
面向STEP-NC铣削加工的刀轨优选与仿真研究
Milling of complicated mould cavity based on UG/NX/CAM;
基于UG/NX/CAM的复杂型腔的铣削加工
Study on milling deformation of aerospace frame monolithic components
航空框类整体结构件铣削加工变形研究
The wood milling processing fuzzy control system was designed by fuzzy control theory.
利用模糊控制理论设计木材铣削加工在线控制系统,并应用MATLAB软件对该模糊控制系统 进行验证和仿真,获得了最佳的控制效果。
Finite element model of milling process sequence forframe monolithic components;
框类整体结构件铣削加工顺序的有限元模型
In this paper,the clamping points are optimized during milling process of thin-walled arc workpiece.
本文通过对弧形薄壁件铣削加工夹紧点的位置进行优化来减少工件的变形,并提出了6条启发式规则。
A new approach is proposed and is applied to constant force control in milling process, where information entropy is used as performance index and sim ulated anneal algorithm used to optimize fuzzy controller parameters.
提出以信息熵为性能指标、用模拟退火算法优化模糊控制器参数的新方法应用于铣削加工恒力约束控制。
It sets up the motion relationship of the edge of end milling cutter and workpieces for analyzing the micro-shafts surface formation in orthogonal turn-milling machining.
为了研究正交车铣加工轴类零件外圆表面的形成过程,在建立铣刀刀刃与工件之间运动关系的基础上,运用计算机仿真模拟了刀刃的运动轨迹,结果表明轴类零件外圆表面是铣刀刀刃运动轨迹包络而形成的。
The flutters phenomenon which appears in the turn-milling machining for micro-miniature shafts, seriously affects the workpieces machining quality.
微细轴车铣加工过程中出现的颤振现象,严重影响零件正常切削加工。
Study on the Machining Mechanism and Parameters Optimization during High Speed Milling of Titanium Alloys
钛合金高速铣削加工机理及铣削参数优化研究
Identification of Cutter Breakage in Variable Cutting Parameters Milling;
变切削参数铣削加工中刀具破损辨识
Identification of Cutter Wear in Variable Cutting Parameters Milling;
变切削参数铣削加工中刀具磨损辨识
Numerical Simulation and Analysis for Machined Surface Topography in Milling Process and Form Error in Face Milling Process;
铣削加工表面形貌及端铣加工变形仿真研究
The Experimental Research of Milling Process Based on Micromilling Machine;
基于微小型铣床的微细铣削加工试验研究
On the Dynamics of the Milling of Ball End Milling: Modeling of Cutting Forces and Simulation;
球头铣刀铣削加工过程的动力学建模及仿真
By simple change to vertical milling machine to implement screw milling
简易改造立式数控铣床进行螺杆的铣削加工
Research on Selection of Optimal Cutting Parameters in High-speed Milling of Thin-walled Al-alloy Workpiece;
铝合金薄壁件高速铣削加工工艺优化
Research of Key Technologies of Physical Simulation of NC Milling Machining;
数控铣削加工物理仿真关键技术研究
Study on the Principle and Relevant Technology of Ultrasonic Milling;
超声波铣削加工原理及相关技术研究
Research and Analyses of NC Milling Process Simulation;
数控铣削加工过程仿真的研究与分析
The Research on Thermal Characteristics of Spindle Components in Milling Center;
铣削加工中心主轴组件热特性的研究
The Arithmetic Research of Simulation about Milling Based VRML;
基于VRML的铣削加工仿真的研究
MasterCAM X Based on High-speed Multi-axis Milling;
基于MasterCAM X的多轴高速铣削加工
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
MasterCAM Automatic Programming in the Numerical Control Milling Processing;
MasterCAM在数控铣削加工中的自动编程
Application Research of NC Milling Machining of Big Modulus Gear;
大模数齿轮数控铣削加工的应用研究
Diamond Milling Simulation of Microstructured Surface
微结构表面金刚石铣削加工仿真研究
