The cure behaviour of HTBN toughened epoxy resin was investigated by using torsional braid analysis method.
用扭辫分析（ＴＢＡ）的方法研究了端羟基液体丁二烯－丙烯腈共聚物（丁腈羟，ＨＴＢＮ）增韧环氧树脂的固化行为，得到了增韧和未增韧环氧树脂的时间－温度－转变固化图（三Ｔ图，ＴＴＴ图）并进行了比较。
The compatibiity of bis(4-(4-ethynylphenoxy)phenyl)sulfone(ATS)anfl polyethersulfone (PES) blends and dynamic mechanical behaviour of blends cured at different conditions are investigated by torsional braid analysis (TBA).
用扭辫分析技术研究了双[4-(4-乙炔端基苯氧基)苯基)砜(ATS)和聚醚矾(PES)共混物及其不同条件下固化共混物的相容性及其动态力学行为。
Based on evaluation of chemical structures of three typical urea-formaldehyde(UF)resins by ~13C NMR, the techniques of torsion braid analysis (TBA) and differential scanning calorimetry (DSC) were applied, respectively, in order to analyze dynamic viscoelasticity and curing characteristics of these UF resins in different curing systems.
在采用13CNMR对3种典型脲醛(UF)树脂化学构造进行分析的基础上,分别利用扭辫分析法(TBA)和差示扫描量热法(DSC)对不同固化体系、不同种类UF树脂固化反应过程中的动态粘弹性和固化特性进行了研究。
Interfacial adhesion strength of composite is characterized by the methods of torsional braid analysis.
使用扭辫分析对复合材料界面粘合强度进行了表征。
Hierarchical Structure of Barrier beds and Interbeds in Braided River Reservoirs
辫状河储层中隔夹层的层次结构分析
The latter is further sub-divided into gravelly and sandy braided fluvial facies.
其中辫状河可划分为砾质辫状河和砂质辫状河。
Research on Braid Group Public Key Cryptosystems and Quantum Cryptanalysis;
辫子群公钥密码系统和量子密码分析技术研究
The analysis and calculation of mobile tortuous bar in pre-torturing process;
汽车悬挂扭力杆预扭强化的分析与计算
Research On Dynamical Analysis Based On Torsional Condition Of Torsion Bar
基于扭力轴扭转状态下的动力学分析研究
Analysis of a Dual-mass Flywheel Damper Model on Torsional Oscillation
双质量飞轮式扭振减振器扭振模型分析
The Structure Analysis and Calculation about OLEO-Pneumatic-Torsion Bar Mixed Suspension
油气—扭杆混合悬挂结构分析与计算
The Performance Analysis of the Antiroli Torsion Bar Spring Installed in High Speed Bogie
高速转向架抗侧滚扭杆弹簧性能分析
A Practical Test Analysis to the Dynamical Strength of the Damping Twisted Bar for a Small Truck
小型货车减振扭杆的动强度实测分析
The Analysis of Torsional Vibration of F_1 and F_4 of Bao Gang 2050 Hot Continuous Rolling Mill Units;
宝钢2050热连轧机组F_1、F_4机座扭振分析
The Characteristic Study on Torsion Vibration of Dual Mass Flywheel and Its Simulation Analysis;
双质量飞轮扭振特性研究与仿真分析
Bending and Torsion Strength Analysis of the 8500TEU Container Vessel;
8500TEU集装箱船整船弯扭强度分析
The Analysis and Discussion of Flexural-torsional Buckling of Thin-walled Steel Beam;
薄壁钢梁弯扭屈曲理论的分析和探讨
Torsion Design and Analysis of Curved Prestressed Concrete Girder Bridges;
预应力混凝土曲线梁桥抗扭设计分析
Analysis and Control on Engine Cranktrain Torsional Vibration;
汽车发动机曲轴扭转振动分析及控制
Simulation and Analysis of Hydropneumatic Elimination Torsion Suspension Based on ADAMS;
基于ADAMS的油气消扭悬架系统仿真分析
Research on Risk Measures Based on Distortion Functions;
基于扭曲函数的风险度量分析与研究
