flatting是什么意思

用法例句

Cross breaks are formed on the surface of cold rolled and tempered strip during temper rolling,which influence the surface quality and mechanical characteristics of the temper rolled strip.

冷轧退火后的带钢在平整过程中产生横折印缺陷,严重影响平整后带钢的表面质量及其力学性能。

The effect of over ageing (OA) and temper rolling on the mechanical properties of cold rolled low carbon SiMn dual phase steel sheets has been studied.

以低碳Si Mn系冷轧双相钢为研究对象,探讨了过时效和平整工艺对双相钢板力学性能的影响。

Aimed at the waves of thin gauge products and the limitation of leveling strip head or tail in temper mill,the function of leveling strip head has been developed and applied in production in Zhujiang Steel.

针对薄规格产品的浪形情况和平整机平整带钢头尾浪形所存在的缺陷等问题,珠钢自主开发了平整机带头平整程序,实现了平整机带头的平整功能,改善了产品的质量,提高了经济效益。

This paper introduced the development state of the heat pressing plasticization leveling process technology of plant board surface and equipment all the world , and entered technology guideline of heat pressing plasticization technology of plant board surface in our country.

介绍了国内外生物质板材表面热压塑化平整加工技术和装备的发展现状,提出了我国研发热压塑化平整加工工艺和装备的技术路线。

During skin rolling,the plastic deformation of strip is small,so the error of prediction with equal deformation in the high direction is large.

根据轧件平整轧制时塑性变形量很小,变形沿带材高度不均匀分布的特点,采用沿高度应力均匀分布的平面假设将带来比较大的误差。

The calculation method based on BP network for rolling force of skin rolling is introduced.

运用 BP网络建立了平整轧制压力计算方法 ,实际应用结果表明 :BP网络建立了平整轧制压力计算方法比较简单 ,计算精度高 ,计算误差小于 8% ,完全可以应用于工程实

During skin rolling of comparatively thick strip,plastic deformation quantity is very small.

较厚带材平整轧制时塑性变形量很小 ,因此沿带材高度变形是不均匀分布的 ,而一般公式采用沿高度应力均匀分布的平面假设将带来比较大的误差。

Research into Effect of Temper on Properties of 08Al Cold Rolled Strip;

平整对08Al钢冷轧薄板性能影响的研究

Study on the strip surface wrinkles and the elimination measures in cold temper rolling;

冷轧平整横折印缺陷产生原因和消除方法

Experiment study on comprehensive evaluation of lubricant used in temper mill;

平整液综合评价实验研究

Elastoplastic model with boundary lubrication of rolling press analysis for skin pass;

平整轧制压力预测的边界润滑弹塑性模型

The theoretical and experimental study of the influence on micro convex profile duplication during skin pass has been done.

对平整轧制中轧辊表面微凸体形貌的复映率影响因素进行了理论分析和实验研究。

Aimed at specially characteristics of skin pass and the consist proportion of lubricant, the study of predicting skin pass rolling force was carried out by theoretical analysis and experimental investigations with rigid, elastoplastic, complete sliding and boundary lubrication model.

针对平整工艺和平整液组成的特点,采用刚性、弹塑性、全滑动和边界润滑等不同模型,进行了平整轧制压力预测模型的理论分析与模拟实验研究。

Elongation assignment of steel plates between a tension leveler and a skin pass mill for the Acid-Refined 2030 in BaoSteel;

宝钢2030酸洗机组中拉矫机和平整机的延伸率分配

Improvement of tension control system of skin pass mill;

平整机张力控制系统的改进

Speed control system of skin pass mill in Cold Strip Rolling Mill of Wuhan Iron &Steel Group Company;

武钢冷轧厂平整机速度控制系统