Deep-drawing steel是什么意思

用法例句

Research on annealing process of 2B06-O aluminium alloy sheets for deep drawing;

深冲用2B06-O铝合金板材的工艺研究

In this article we describe the development and characteristics of deep drawing quality hot dip galvanizing strip and analyze the influence of processing values on product properties, give the main points on controlling the quality of products.

阐述了深冲热镀锌板的发展趋势和生产工艺特点。

The effects of different anisotropic yield criteria(Hill1948,Barlat YLD91 and CMTP) on the deep drawing simulation of a circular blank sheet based on FEM were studied,and the numerical solution of different yield functions was compared with each other.

基于板料成形深冲过程的数值模拟,研究了不同的各向异性屈服准则(Hill1948,Barlat YLD91和CMTP)对铝合金板深冲成形过程起皱预测的影响,并对模拟结果进行了比较,结果表明:采用不同屈服准则模拟的应力和应变分布有所不同,采用CMTP和Balart YLD91屈服准则比Hill1948屈服准则预测的要高。

The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.

通过轧制温度、轧制方式实验,以及织构和力学性能分析,研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。

The effects of processing parameters of ferritic rolling on microstructures and mechanical properties especially on deep drawability of ultra-low carbon and Ti-stabilized interstitial-free steels were investigated,and the precipitates in Ti-IF steel were also analyzed.

本文研究了铁素体区轧制工艺条件对超低碳(ULC)钢和钛处理的无间隙原子(Ti-IF)钢组织和性能,特别是对深冲性能的影响,并分析了Ti-IF钢中的析出物。

The cross-section metallurgic structure at various annealing temperature is analyzed and compared with import material based on the statistical study of the influence of annealing temperature on the deep drawability of cold rolled IF steel.

在统计分析退火温度对冷轧 IF 钢深冲性能的影响的基础上,对不同退火温度下的断面金相组织亦进行了分析,并与进口料进行了对比。

The effect of the reduction in cold rolling IF steel sheet for drawability;

冷轧压下率分配对IF钢深冲性能的影响

The results showed that the IF steel has better deep drawability,higher mechanical and texture strength and elongation if the hot rolling temperature was low with big reduction in ferrite region.

结果表明,较低的铁素体轧制温度和较高的铁素体区压下量时,IF钢具有更高的深冲性能、相对较高的强度、延伸率以及织构强度。

How the processing conditions affect the properties especially the drawability of a ferritic hot-rolled and annealed Ti-IF sheet steel was investigated.

研究了铁素体轧制工艺条件对一种Ti-IF钢的性能,特别是深冲性能的影响。

Effect of cold rolling-process on microstructure and deep-drawing property of 1050H19 aluminum foils used in air-conditioner;

冷轧工艺对1050H19空调箔微观结构及深冲性能的影响

The relationship of deep-drawing property and rolling parameters of IF steel was researched by the testing of ferritic rolling and annealing.

通过对IF钢铁素体区轧制、退火工艺的研究及对塑性应变比r值的检测,并结合对取向分布函数图的定量分析,研究了深冲性能与轧制工艺参数的关系。

Influence of texture in 3104 Aluminum sheet on r values and deep drawing property;

3104铝板织构对r值及深冲性能的影响

Functional relationship between deep drawing property and process parameters of Zn-Cu alloy was studied by regression analysis method.

采用回归分析方法研究了Zn-Cu合金深冲性能与工艺参数间的函数关系。

After being rolled in ferrite area, the IF steel was proceeded once and twice cold rolling, then its deep drawing property was studied.

研究了经铁素体区热轧后的 IF钢板坯在随后的一次冷轧和两次冷轧工艺中所表现出的深冲性能规律。

Texture and modeling calculation of r values of deep drawing steel sheet;

深冲钢板的织构及塑性应变比r值的模型计算

Influence of dissolved carbon content on recrystallization γ-fibre texture in ultra-low carbon deep drawing steel sheet with high purity was investigated and the relationships between dissolved carbons and recrystallization γ-fibre texture and {111} <112> and {111} < 110 > textures were analysed by 3-dimensional orientation distribution function.

借助三维取向分布函数探讨了高纯超低碳深冲钢板的固溶碳含量对再结晶γ织构的影响，分析了固溶碳与再结晶γ织构及其中的｛１１１｝＜１１２＞和｛１１１｝＜１１０＞织构之间的关

It is analyzed the controlling-sulfur technique in smelting of SPHD deep drawing steel.

对唐山建龙实业有限公司SPHD深冲钢冶炼过程中的控硫技术进行了分析。

This paper according to the concrete application on Cold rolling deep drawing steel mechanical property optimization, introduces the idea of six sigma administration and main analytical method of DMAIC each phase.

本文根据六西格玛管理在冷轧深冲钢机能优化中应用的实际情况,介绍了六西格玛管理的技术方法和项目运作在DMAIC各阶段的主要分析方法。