The co crystal and co melting temperatures of several food types are determined by a deep research into the conducting principle during the food freezing process and a thorough analysis of the experimenting data.
对食品在冷冻过程中的导电机理进行了深入研究 ,对试验数据进行了分析和处理 ,得到了几种食品的共晶、共熔温度。
Preparation and characterization of LiClO4-LiNO3-LiBr as low-melting-point eutectic salt;
低温共熔盐LiClO_4-LiNO_3-LiBr的制备与表征
Prediction of Injection Pressure and Melt Temperature of Injection Molding by Radial Basis Function Network;
基于神经网络技术的注塑成型注射压力和熔体温度预测
Effects of Melt Temperature on Solidified Structure of Sn-Sb Peritectic Alloy in Ultrasonic Field;
超声场下熔体温度对SnSb合金凝固组织的影响
The stress distribution of polycarbonate injection molded parts is tested by the photo-elastic experiment under different gate type and different melt temperature,and the tensile strength and luminous transmittance are tested.
用光弹实验测试不同浇口类型、不同熔体温度下聚碳酸酯透明注塑制品的应力分布,并测试了制品的拉伸强度和透光率。
The measures that can control the generation of brokea filament wore put forward.
提出了控制熔体温度、缩短熔体输送停留时问。
Numerical Simulation of the Temperature Field during Aluminum Melting Process
铝熔炼过程合金熔体温度场的数值模拟
The Effect of Melt Temperature Treatment on Solidification Microstructure and Capability of ZL114A Alloy;
熔体温度处理对ZL114A合金组织及其性能的影响
The Melt Temperature Treatment of Al-Si Alloy and Its Solidification Process;
Al-Si系合金的熔体温度处理及其凝固过程研究
Research of the System to Measure the Temperature Field of High Temperature Melting Metal Based on CCD Image Sensor;
基于CCD图像传感器的高温熔体温度场软测量系统的研究
Effect of Melt Temperature in Outside Ladle on Microstructure and Hardness Distribution of 7075/6009 Aluminum Alloy
外浇包熔体温度对7075/6009铝合金铸锭组织和硬度分布的影响
Exploration of Temperature-induced Liquid-liquid Structure Transition of PbSnBi Ternary Alloy;
PbSnBi三元合金熔体温度诱导液—液结构转变行为研究
Effects of Numerical Simultion in Static Mixer Structure on the Temperature Uniformity of PS Melt Containing CO_2
数值模拟静态混合器结构对PS/C0_2熔体温度的影响
The Effect of the Melt Thermal Treatment with Composition Compensation on the Microstructure of the Primary Silicon of the Silumin
成分互补熔体温度处理对高硅铝合金的初生硅相组织的影响
Effects of ladle inside melt temperature on microsturctures and properties of 7075/6009 composite plates
内浇包熔体温度对7075/6009复合板材组织性能的影响
Process window analysis, another part of mold flow analysis, examines melt temperature, mold temperature, injection pressure, and fill times.
加工窗口分析、它零件的模流分析，检查熔体温度、具温度、塑压力和充填时间。
The results indicate that there are some quasiliquid layers on plane (001) at some temperature below the melting points of the prefect crystals.
结果表明，(001)面在低于其完整晶体的熔化温度出现预熔。
Dependences of Size and Pressure on the Melting Temperature of Nanocrystals;
纳米晶体熔化温度的尺寸和压力依赖性
Measuring Temperature Distribution of Laser Induced Plasma in Deep Penetration Laser Welding;
激光深熔焊接光致等离子体温度分布的测量
Tests of Homogenization Temperature and Volatile Content of Melt Inclusions
熔融包裹体均一温度及挥发组分含量测试
melting point type disposable fever thermometer
熔点型消耗式温度计
fusible-element-type fixed temperature detector
易熔合金温度探测器
Research of the Temperature Measurement Technology Based on CCD Imaging Sensor and Adapted to Measure Surface Temperature Field of High Temperature Smelting Metal;
基于CCD图像传感器的高温熔体表面温度场测试技术研究
