Effect of annealing temperature on the microstructure of rapidly-solidified TiNi-Cu alloy ribbons;
退火温度对Ti_(53.5)Ni_(22.8)Cu_(23.7)合金快速凝固条带组织的影响
Influence of annealing temperature on structure and properties of Al-6Mg-Sc-Zr alloy;
退火温度对Al-6Mg-Sc-Zr合金组织与性能的影响
Effects of annealing temperature on microstructures and properties of the 25Mn-3Si-3Al-TWIP steel;
退火温度对25Mn-3Si-3Al-TWIP钢组织和力学性能的影响
Effect of anneal temperature on performance of poly(chloro-p-xylylene)films;
退火温度对聚氯代对二甲苯膜性能的影响
Taking original shape examination as contrast,the HT250 welding strain under three kinds of different anneal temperature(500℃、600℃、650℃)was studied.
以未进行退火处理试件为对比,研究了三种不同的退火温度(500℃、600℃、650℃)对HT250焊接残余应力的影响;对四块试件分别测试了各自的焊接应力,并将测试数据输入计算机得到了不同退火温度下的试件的焊接应力曲线;结果表明:此试验的最佳退火温度为650℃。
The paper studies the effect of different cold deformation and anneal temperature as well as holding time on the material organization and property of alloy pipe 5086,sets the production process system of aluminum alloy 5086 at state of H34.
研究了不同冷变形程度、退火温度与保温时间对5086铝合金管材组织及性能的影响,确定5086铝合金H34状态的生产工艺制度,在工业生产条件下,其产品的技术指标达到了用户要求。
Effects of tempering temperature on the microstructures and properties of vessel steel with high strength;
回火温度对高强度容器钢组织结构与性能的影响
Effect of Tempering Temperature on Structure and Mechanical Properties of Steel 30CrMnSiNi2A;
回火温度对30CrMnSiNi2A钢组织和性能的影响
Effect of Tempering Temperature on Microstructure of Steel ZG0Cr13Mn8N;
回火温度对ZG0Cr13Mn8N钢显微组织的影响
The effect of temper temperature on microstructures and wear resistance of surfacing deposits of ferro-based multicomponent alloy was investigated.
研究了回火温度对铁基多元合金堆焊层组织及耐磨性的影响。
The influence of processing parameters,such as finishing rolling and temper temperatures,on the hardness and microstructure of 1.
2311塑模钢扁钢尺寸、终轧温度、回火温度等主要工艺参数对其轧后硬度、回火硬度及组织均匀性的影响。
The effect of temper temperature on microstructure of KmTBCr26 high chromium cast iron was investigated by means of X-ray diffraction and optical microscope,and the hardness and impact toughness of samples treated by various tempering techniques were tested.
利用X射线衍射及光学显微镜,研究了回火温度对KmTBCr26高铬铸铁显微组织的影响并测定了相应的硬度和冲击韧性。
Optimization of Annealing Temperature of SRAP-PCR in 5 Temperate Fruits
5种温带果树SRAP-PCR退火温度的优化
Temperatures of anneal: At 30℃, the stripes of amplification were most distinctive.
退火温度:在30℃时扩增条带最清晰。
Effect of Annealing Temperature on Microstructure and Properties of ZL102 Alloy
退火温度对ZL102组织和性能的影响
Effect of Annealing Temperature on Tb-Catalyzed GaN Nanorods
退火温度对Tb催化GaN纳米棒的影响
Effect of Annealing Temperature on the Property of NiZn Ferrite Thin Films
退火温度对NiZn铁氧体薄膜性能的影响
Microstructure and Residual Stress of Cu Films Annealed at Different Temperatures
退火温度对Cu膜微结构与应力的影响
It is discovered that there is a most favored temperature for annealing crystals in removal of residual stress This temperature is Below the one in the sense of ordinary heat processing.
我们发现为消除残余应力存在一个最佳的退火温度; 该温度低于通常的退火温度。
Effect of the Recrystal Texture During the Continuous Annealing Process by the Chemical Composition and the Temperature
化学成分及退火温度对连续退火再结晶织构的影响
And a clear band with less interferer was seen at 58.6℃ as anneal temperature.
退火温度为58.6℃时，β-actin扩增产物的条带最清晰。
The Influence of Annealing Temperature on the Structure and Morphology of ZnO:Tb Thin Films;
退火温度对ZnO:Tb复合薄膜的结构和形貌的影响
Research on the Temperature-control System of the Continuous Annealing Installation on the Cable Production Line;
电缆生产线连续退火温度控制系统的研究
The Effect of Annealing Temperature on the Properties and Second-Phase Particles of 0.4 mm Galvanized Ti-IF Steel
退火温度对0.4mm热镀锌Ti-IF钢板组织和性能的影响
The effectiveness of the anneal temperature on the mechanical properties of micro-filament of tungsten rhenium alloy wire
退火温度对微细钨铼合金丝机械性能的影响
Effects of Annealing Temperature on Microwave Absorbing Properties of Ni_(0.5)Zn_(0.5)Fe_2O_4 Nano-crystalline
退火温度对纳米晶Ni_(0.5)Zn_(0.5)Fe_2O_4吸波性能的影响
Influence of Intercritical Annealing Temperature on Microstructure and Mechanical Properties of TRIP780
两相区退火温度对TRIP780钢组织和性能的影响
Properties of electric transport in crystallized silicon films under different annealing temperatures
不同退火温度下晶化硅薄膜的电学输运性质
Effect of vacuum annealing temperature on properties of GZO/Ag/GZO three-layer films
真空退火温度对GZO/Ag/GZO三层膜性能的影响
Effects of annealing temperature on microstructure and properties of Zr-4 processed by surface mechanical attrition treatment
退火温度对SMAT处理Zr-4合金组织和性能的影响
