Study on the Adaptable Experiment of Microorganism Trench-leaching Uranium Ore from Shannan ,721 Deposit;
721矿山南铀矿石微生物槽浸的适应性实验研究
On the basis of the above ,the microorganism trench-leaching feasibility of Yong Ping copper ore is assessed.
以永平铜矿石为研究对象 ,通过有菌与无菌对比实验 ,研究了微生物槽浸铜过程中主要技术参数 (Fe3+ ,Fe2 + ,pH ,Eh ,Cu)的变化规律。
In the process of leaching, porous clad of phase separated glass may has tensile stress or compressive stress because of the different copmposition,phase separation condition and cooling rate.
分相玻璃纤维由于组成、分相制度、冷却速度的不同，而在浸析过程中受到拉应力或压应力。
We can get no crack porous glass withcertain strength by adjusting the leaching condition.
分相玻璃在浸析过程中由于组成、分相制度、冷却速度的不同，而使多孔玻璃受到拉应力或压应力，通过改善浸析条件可制得具有一定强度、没有裂纹的多孔玻璃。
hot-and-cold steeping
(木材防腐) 热冷槽浸渍
Direct heating methods such as flames, steam impingement, electrical resistance elements, water bath immersion, hot plates, and ovens should not be used.
不能使用直接加热系统，如火焰、蒸汽冲击、电阻元件、水槽浸泡、轻便电炉和烤箱。
an oil bath,eg for parts of machinery
油槽（如用于浸洗机器零件的）
electric immersion heater for attachment to tank vats or similar vessels
浸入式电加热器,装在水箱、水槽或类似容器上
To treat(metal) in a chemical bath.
用稀酸液浸洗在化学电解槽中处理（金属）
This can be eliminated by placing the model in an immersion cell.
可将模型置于浸没液槽中，以消除此种误差。
The grapes are put into stainless steel vats where they macerate in cold during one week before beginning to ferment.
拣选出的果实置入不?钢槽冷浸一周才开始发酵。
Waxed paper: Paper which has either been dipped into a wax bath and immediately chilled, or passed through rollers which drive the wax into the paper.
蜡纸:浸入蜡槽后，立刻冷却或穿过压辘间，把蜡压上的纸。
Then put into stainless steel vats where they macerate in cold during one week before beginning to ferment.
拣选出的果实置入不锈钢槽连皮冷浸一周才开始发酵。
Note:The lengths of suction pipe and air pipe may be different according to different size of leaching tank.
注：吸炭管和空气管的长度因所配浸出槽的规格而异。
The nickel bath process makes it possible to impregnate all internal and external surfaces of the actuator.
镍镀槽处理使得执行机构的内外表面都能够完全浸渍。
radiant flame, steam impingement on the container, immersion in a heated water bath or electrical resistance heater elements in direct contact with the container.
辐射火焰、容器上的蒸汽冲击、热水槽中的浸泡或直接接触容器的电阻加热元件。
starting sheet cells
始极槽,种板槽,始板槽
groove-cutting chisel
槽刨, 油槽铲(轴承)
To become immersed in or as if in liquid.
浸泡浸在液体中、沉浸
The groove so cut.
榫槽这种切割的凹槽
A long, narrow furrow or channel.
沟，槽一长而窄的沟或槽
CAB CAVITY 42, AND GROUND, CAB CAVITY
ＣＡＢ插槽４２和地、ＣＡＢ插槽５。
