Microstructure and strength of aluminum and aluminum alloy joint brazed with rapidly-cooled Al-Si-Cu-Zn filler metals;
Al-Si-Cu-Zn急冷钎料钎焊铝及铝合金的界面结构及强度
Green bright dipping process for aluminum and aluminum alloy;
铝及铝合金环保出光工艺
Study on the process of electroless Ni-P alloys plating on aluminum and aluminum alloy;
铝及铝合金化学镀Ni-P合金工艺研究
Determination of Fe, Cu, Si, Mn, Mg, Cr,Zn, Ti and Ga Elements in Aluminium and Aluminium Alloy on Import & Export;
进出口铝及铝合金中Fe、Cu、Si、Mn、Mg、Cr、Zn、Ti、Ga等元素的测定
Chromating technology of aluminium and aluminium alloy are introduced.
对铝及铝合金的铬酸盐转化膜工艺作了介绍,论述了铬酸盐转化膜工艺的日常管理及注意事项。
The EDTA-H 2O 2 specteophotometry method can determined iron in the aluminium and aluminium alloy.
在pH≥ 10 2的氨性介质中 ,Fe(Ⅲ )与EDTA及H2 O2 形成稳定的紫红色三元配合物 ,铁量在 0～ 0 0 6mg/ml范围内符合比耳定律 ,可用于铝及铝合金中铁的测
An environmentally acceptable chemical conversion agent CF-5 was formulated from non-toxic titanium salt, zirconium slat, and organic polymer so as to replace the conventional toxic chromium(Ⅵ) passivation agent used for aluminum and its alloys.
开发了一种由无毒的钛盐、锆盐和有机聚合物组成的铝及铝合金化学转化剂CF-5,以取代有毒的六价铬钝化。
The development of zincation for aluminum and its alloys, from using s imple concentrated solution to dilute solution, finally to multi-metal and cyanide s olution, is described in detail.
较详细地阐述了铝及铝合金浸锌工艺 ,从单纯的浸浓溶液到稀溶液 ,再到多元合金的浸锌溶液及无氰浸锌溶液的发展过程 ,分析了浸锌工艺的优点与缺点 ,及防止浸锌工艺引出的特殊腐蚀问题的措施 ,对浸锌机理进行了初步探索。
This paper described the recently progress on surface treatment of aluminum and its alloys.
本文简要介绍了目前铝及铝合金表面处理技术的进展。
Aluminium and aluminium alloys--Terms and definitions
GB/T8005-1987铝及铝合金术语
uminium alloy extruded rods
铝及铝合金挤压棒材
Metallurgy Bonding of Closed-cell Aluminum Foam with Aluminum and Aluminum Alloy Plate
闭孔泡沫铝与铝及铝合金覆板的冶金结合
Progress in Research on Electrodepositing Al and Its Alloy from Chloroaluminate Molten Salts
氯铝酸熔融盐中电沉积铝及铝合金研究的进展
Method for spectrographic analysis of aluminium and its alloys
GB/T5871-1986铝及铝合金摄谱光谱分析方法
Aluminium and aluminium alloys--Compression test method for tubes
GB/T3251-1982铝及铝合金管材压缩试验方法
Hot rolled strip of aluminium and aluminium alloy
GB/T16501-1996铝及铝合金热轧带材
Aluminium and aluminium alloy corrugated sheets
GB/T4438-1984铝及铝合金波纹板
Wrought aluminium and aluminium alloy-Welded tube
GB/T10571-1989铝及铝合金焊接管
Wrought aluminium and aluminium alloys--Chemical composition limits
GB/T3190-1996变形铝及铝合金化学成分
Temper designation system for wrought aluminium and aluminium alloy
GB/T16475-1996变形铝及铝合金状态代号
Aluminium and aluminium alloy rolled sheet
GB/T3880-1997铝及铝合金轧制板材
Aluminum and aluminium alloy cold rolled strip
GB/T8544-1997铝及铝合金冷轧带材
Wrought aluminium and aluminium alloy-Patterned sheet
GB/T3618-1989铝及铝合金花纹板
Anodizing of aluminium and aluminium alloys-Terms
GB/T11109-1989铝及铝合金阳极氧化术语
Technical specification for welding aluminium and aluminium alloys
铝及铝合金焊接技术规程
Aluminium and aluminium alloy wires for riveting purpose
GB/T3196-1982铆钉用铝及铝合金线材
Aluminium and aluminium alloy wires for welding purpose
GB/T3197-1982焊条用铝及铝合金线材
