Failure Analysis of Breaking Down of the Air Compressor Pulley of a Bus;
客车空气压缩机皮带轮断裂失效分析
Research of 3D-design system of pulley based on Solid Edge;
基于SOLID EDGE的皮带轮三维设计系统的研究
Research on the Embedded Opening Numerical System in Belt-pulley Spinning Machine
皮带轮旋压机床用嵌入式开放性数控系统的研究
Through the analysis on the movement,stress and strain during the process of plate-made belt-pulley spinning forming,this paper pointied that the main influence factors about belt-pulley perfect forming are the shape of pre-forming groove, axle feeding speed of base frame,radial feeding speed of spinning wheel and so on.
通过对钣制皮带轮旋压成形过程的运动及应力应变分析 ,指出预成形槽的形状、顶压座的轴向送进速度及旋轮的径向进给速度等是带轮正确成形的主要影响因素。
The original text explained why the middle of belt pulley was embossed in the angle of mechanics, and gave emphasis to analyzing different forms and concrete figures of embossment of the middle of belt pulley.
从力学的角度解释了皮带轮中部凸起的原因 ,着重分析了高速皮带轮中部凸起的各种形式和具体的凸起数值 ,从而完善了皮带轮的结构设计 ,为皮带轮在实际中的应用奠定了理论基础。
Introduces the methods about parameterization structural design of belt pulley based in UG.
介绍了在UG环境下进行皮带轮参数化结构设计的方法,分析了不同类型皮带轮的结构特点及设计要求。
The original foundry technique of the belt pulley was designed by conventional design method in the paper.
采用传统的铸造工艺设计方法对皮带轮灰铁件进行了铸造工艺设计,运用Z-Cast软件对皮带轮初始工艺的凝固过程进行了数值模拟,分析了初始工艺产生缺陷的部位和原因。
This article analyses the technological analysis of the belt wheel cover for gardening tractor, and introduces the working principle and design requirements of drawing dies.
对园艺管理机皮带轮罩进行了工艺分析 ,介绍了拉延模的工作原理及设计要点 ,提出了深拉伸不等高盒形件可以采用同一模具进行两次拉延的工艺方法 ,以避免水平切
Various speeds may be obtained by the use of large and small pulleys.
利用大小皮带轮可以获得不同的转速。
Various speeds may be obtained by the use of large and small pulley.
利用大小皮带轮，可以获得不同的速度。
MOTOR PULLEY AND V-BELT
马达皮带轮和v 形皮带
eccentric sheave
偏心内轮偏心皮带轮
The belt started wrapping up on the tractor pulley.
皮带开始绕在拖拉机的皮带轮上。
Put the V belt on the pulley of the sewing machine.
首先把v 形皮带挂到缝纫机皮带轮上。
pulley for main grain auger
谷粒推运螺旋皮带轮
crankshaft fan pulley
曲轴上的风扇皮带轮
This paper introduces a new method to process leather gear and the influence of steel material on leather processing. Besides, it also makes dear the method of choosing leather gears.
介绍了皮带轮新的加工方法和钢材成份对皮带轮加工的影响，及皮带轮材料的选取。
(of a lathe) equipped with gearing for reducing the speed of the spindle from that of the driving pulley.
（指车床）装有齿轮以降低皮带轮的轴杆速度。
This large gear turns the small one to rotate the cylinder.
这个大齿轮带动小齿轮使滚筒旋转。
Attach the pulley which is held by hand with screws.
用螺丝安装皮带轮的手持部分。
carbide-tipped pulley grooving tool
硬质合金焊接皮带轮切槽车刀
Tighten gear mounting bolts to specification.
根据规定拧紧齿轮安装皮带。
Set bobbin presser 1 down to make the winder come in contact with the belt.
放倒梭芯压片1，让绕线轮接触皮带。
A band made around the trunk of a tree by the removal of a strip of bark.
轮迹剥去树皮后在树干上形成的带
Design of the crankshaft pulley signal plate dedicated CNC milling machine
曲轴皮带轮信号盘数控铣齿专机设计
Technological Process and Die Design for the Belt Sheave
板制多楔皮带轮冲压工艺与模具设计
