Design and technology about veneer lathe;
对单板旋切机的导轨设计与加工工艺的探讨
for a long time,the human-machine interface design of veneer lathe in china only rely on experience or copy foreign products plan, those research lack adequate theoretical basis.
长期以来,国内在旋切机的人机界面设计上仅凭经验或者仿造国外产品,缺乏充足的理论依据,再加上我国于1988年12月10日发布了《中国成年人人体尺寸》标准(GB/T10000-1988),距今已近20年之久,数据已显得陈旧,已经远远不能满足工业产品设计、设备更新及安全防护等等方面的设计需要了。
A auto-controlled system of spindleless rotary lathe based on 89C51 is introduced in this paper.
介绍了一种基于AT89C5 1单片机开发的无卡轴旋切机自动控制系统。
：This article aims at some existent problems in round log turning lathe , so an autocontrol system about that is designed .
以89C51单片机为核心，由模数转换、驱动显示、位置开关、控制键盘等功能模块所组成的圆木旋切机自动控制系统的设计；克服了圆木旋切机原有的一些缺点。
There are experiential and calculating method for eccentricity calculation and it's decision on urethane anvil-roll of the rotary die-cutter.
旋转模切机砧辊处的偏心量认定与设计计算，有经验计算与工程计算的一般原则方法。
hydraulic double-chuck spindle veneer lathe
液压双卡轴木旋切机
Veneer peeling lathe of small dimension wood simple non-chuck spindle veneer lathe
小径材的理想旋切设备—简易无卡轴旋切机
STUDY ON THE MICROCOMPUTER DC SPEED-REGULATING SYSTEM OF VENEER LATHE
单板旋切机微机直流调速系统的研究
BQ1127/15/B Veneer Lathe Ergonomics Design Research;
BQ1127/15/B型旋切机人机工程设计研究
General technical conditions for the veneer lathe
GB/T14713-1993旋切机通用技术条件
General rules of knives for veneer lathe
GB/T15785-1995旋切机刀片通用技术条件
Hydraulic System Design and Research of Log-core Veneer Lathe
无卡轴旋切机液压系统的设计与研究
Research on Log-Core Veneer Lathe Auto Control System;
原木无卡轴旋切机自动控制系统的研究
Concurrent Engineering and Its Key Technology Analysis Application of Concurrent Engineering in the Development of Log-core Veneer Lathe
并行工程在无卡轴旋切机研制中的应用
unloader's cutting auger
卸载机切碎螺旋推运器
The Calculation of the Instaneous Thickness of Cutting Chip on the Shearer Helical Drum
采煤机螺旋滚筒瞬时切屑厚度的计算
The CAD of the spiral reamer anti-cutting distorts
螺旋绞刀抗切削变形计算机辅助设计
a mechanical device for cutting; usually with a revolving blade.
用来切割的机器装置；通常带有旋转的刀片。
Study on the Failed Mechanism and Experiment of Spiral Notch-holes Blasting;
螺旋切槽孔松动爆破力学机理及试验研究
Study on Enhancement Mechanism by Rotary Tangential Flow in Tubular Membrane Microfiltration;
旋转切向流强化管式膜微滤的机理研究
The Electric System of the 1850mm Cross Cut Line and the Deviation Analysis of the High Speed Rotary Shear;
1850mm横切机列电控系统及旋转飞剪误差分析
Study of Centering Optimum of Intellectualized Peeling Centering Robot;
智能型旋切定心机器人中定心优化研究
Application of Adaptable Design in Product Platform Design for Spinning Cutting Machines;
基于可适应设计的旋压切割机产品平台构建
