Design of Die Casting Die for Electric Fule Throttle in Automobile;
汽车电喷节流阀体压铸模设计
Design and Improvement of Gating and Exhausted System in Die Casting Die for Airless Gun;
无气喷枪压铸模浇注系统的设计与改进
Die Casting Die with Screw Arbor with Large Helical Angle for Screw Thread Unloading;
大螺旋角螺杆脱螺纹压铸模
Simulation and optimization of gating system of die-casting die for magnesium alloy AM60B part;
AM60B镁合金压铸模浇注系统的模拟与优化
Intelligent CAD System of Die Casting Mould for Elbow;
弯管压铸模智能CAD系统的研究
The over-constrained location of die casting mould structure was studied based on the example of slider block core pulling mechanism.
以滑块抽芯机构为例,对压铸模结构中的过定位问题进行了研究,提出了具体的结构改进措施。
Therefor a particular die casting mould for the axle housing cast was designed.
为此设计了一种特殊的轴套压铸模具,论述了模具结构特点和工作原理。
The structural character of the driving end caps of Comings B series diesel oil dynamotor is analyzed, the original diecasting die structure is optimized, as well as the productive efficiency and die life get improved.
分析了康明斯B系列柴油发电机驱动端盖的结构特点,对原有压铸模具结构进行了优化,大大提高了生产效率及模具寿命。
In the design of diecasting die for castings with the inclined down holes or inclined down cavities, inclined down loosing is one of difficult points of the designs of the diecasting die.
在具有斜下向孔或斜下向凹凸铸件压铸模设计中,斜下向抽芯是压铸模设计的难点之一。
Aluminum alloy diecasting die design and optimal project of electrical wares box for lamps are introduced.
介绍了灯具电器箱铝合金压铸模设计及优化方案。
The structure of the die_casting die for the hub was introduced.
分析了铝合金轮毂的结构特点 ,介绍了铝合金轮毂压铸模的结构 ,并详细说明了模具浇注系统、溢流系统、冷却系统、推出机构的设
The die plates and accessories of the die_casting die for aluminum_alloy parts were deˉsigned with the database developed by using Visual Foxpro.
利用VisualFoxpro语言建立数据库 ,对铝合金压铸模中各模板及零件进行编程设计。
Through the design of the die_casting die for forming the lever of high_melting_point alloy under semisolid state,the main points for designing the die were presented.
通过杠杆的半固态压铸模设计 ,提出了黑色金属半固态压铸模的设计要点 ,研究了设计中涉及的压铸机选择、压室设计、成型部分材料选择、浇注系统设计、模具加热冷却系统设计等关键技术问题 ,得出了解决问题的方
Computer aided design for the exhaust system of die-casting mould;
压铸模排气系统的计算机辅助设计
The Optimization of Die Casting Technology and Die Casting Die;
铝合金压铸工艺与压铸模具优化设计
Fracture Analysis of 3Cr2W8V Steel Pressure-casting Die
3Cr2W8V钢压铸模具断裂分析
Impact of Joint Face of Casting Die to Craft Character;
论压铸模分型面对铸件工艺性的影响
Design of Diecasting Die with Rotated Strip Rack-Gear Mechanism for the Outside Screw Thread Parts
齿条-锥齿轮旋出外螺纹铸件压铸模设计
The Study and Development of Standard-part Library of 3D Die-casting Die;
三维压铸模具标准件库的研究与开发
Research of CAD System of Die-casting Mould Based on Pro/ENGINEER;
基于Pro/ENGINEER的压铸模具CAD系统研究
Study of the Normalized Design for Die-casting Die Based on Pro/E;
基于Pro/E的压铸模规范化设计的研究
Research of CAD System of Stripping Mechanism for Die-cast Mould Based on ObjectARX2000;
基于ObjectARX2000的压铸模推出机构CAD系统研究
The Application Development of Die-casting CAD Based on Pro/E;
基于PRO/E的压铸模CAD二次开发
Heat Treatment Techonolgy to Enhance H13 Compression Casting Mold Life;
提高H13压铸模寿命的热处理工艺
Numerical Simulation of Filling and Solidification Process for Casting by Low-Pressure Casting;
低压铸造铸件充型凝固过程数值模拟
Research on Numerical Simulation of Die Casting of Aluminum Alloy Die Castings
铝合金压铸件压力铸造成形数值模拟研究
formed by forcing molten metal into a die.
用通过施压将金属熔化铸成的模子而铸造成形。
Digital Simulation of Squeeze Casting of ZA27 Alloy with Large Ratio of Height to Diameter;
大高径比ZA27合金铸件挤压铸造过程数值模拟
Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel
低压铸造铝合金轮毂铸造应力的数值模拟
Study on Material of Ductile Cast Iron and Numerical Simulation of Lost Foam Casting for Large-size Punching Dies;
中大型冲压件模具球墨铸铁材料及消失模铸造数值模拟研究
Computer Simulation of Liquid Metal Flow into Diecasting Cavity
压铸型腔金属液流动的计算机模拟
ornament, of glass, cast or mould, for interior decoration
玻璃装饰物,压铸或模制,用于室内装饰
