Research progress in brazing technology for TiAl-based alloy;
TiAl基合金钎焊技术研究现状及展望
The brazing technology for asynchronous traction motor is introduced from various aspects as the choosing of end ring and conducting bar materials, solder and flux, brazing joint type and brazing technology.
从端环和导条材料的选择、钎料和钎剂的选择、钎焊接头型式的选择及其钎焊工艺等方面介绍了异步牵引电动机端环与导条的钎焊技
n this thesis, high-frequency Btazing (HFB) and salt-bath brazing(SBB)for 35CrMnSiSteel and YG11C ceramic are investigated and the feasibility of substituting the integrated prccers of SBB and beat-treatment for the process of HFB and reheating treatment is also discussed in view of the shearing strength of brazing joint and the tensile properties of 35CrMnSi steel.
本文研究了３５ＣｒＭｎｓｉ钢与ＹＧ１１Ｃ硬质合金高频钎焊与盐浴钎焊工艺。
Technical specification for welding copper and copper alloys
铜及铜合金焊接及钎焊技术规程
Brazing technology for end-ring and conducting bar of asynchronous traction motor
异步牵引电动机端环与导条钎焊技术
Study on Resistance Brazing Technology for TiNi Shape Memory Alloy;
TiNi形状记忆合金电阻钎焊技术的研究
Study on Brazing Technology for LY12 Aluminum Alloy at Middle-range Temperature;
LY12铝合金中温钎焊技术的研究
The Research of Brazing Application for Measuring Installation of Fast Neutron Experimentation Reactor;
快中子实验反应堆测控装置钎焊技术研究
Application of Main Transformer Terminal Phosphorized Copper Cast Brazing Technique
浅谈主变接线柱磷铜浇铸钎焊技术的应用
Research Progress on Brazing of Cemented Carbides to Steels
硬质合金与钢基体钎焊技术的研究进展
Testing techniques of brazing and diffusion welding quality of liquid rocket engine
液体火箭发动机钎焊、扩散焊质量检测技术研究
Torch-Brazing of T2 Copper with 1Cr17Ni2 Stainless Steel
T2紫铜与1Cr17Ni2不锈钢火焰钎焊焊接工艺技术研究
Improvement of joint brazability of aluminum alloys to stainless steel in the air
铝合金与不锈钢大气钎焊性的改善——铝合金与不锈钢焊接技术(二)
Research of the Reliablity Technology Based on the Single CHip Microcomputer Measurement & Control System on the ZLQ - 400WD Vacuum Welding Furnace;
ZLQ-400WD真空钎焊炉单片机 测控系统的可靠性技术研究
Numerical simulation for transient behavior of fluid flow and heat transfer in laser-brazing pool of beryllium plate
铍材激光钎焊过程中熔池流场和热场的动态模拟技术
electric brazing
电加热钎焊;电热钎焊;电热铜焊;电热硬钎焊
Study on the new type soldering acid and filler metal for restoration of ancient bronze;
古代青铜器修复钎焊用钎剂与钎料的改性研究
Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;
基于Sn-Pb-Zn钎料铝合金钎焊工艺研究
The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;
非晶Cu-P钎料的性能及钎焊机理研究
Ti-25Cu-25Zr Filler Metal and Pure Titanium Brazed Process
Ti-25Cu-25Zr钎料与纯钛的钎焊工艺
A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy
Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究
