Type test system of cylinder valve based on Movicon X configuration;
基于Movicon X组态平台的气瓶阀型式试验测试系统
Inquiry into the deformation problem on the sealing material of cylinder valve;
关于气瓶阀门阀瓣密封材料变形问题的探讨
At present,the state has issued several standards for the production and test of cylinder valves.
目前,国内对气瓶阀的生产和检验制定了相关标准,但是没有配套的型式试验测试系统来检验。
The reason for the oxygen cylinder burst accident is analyzed by checking totally,analyzing chemical element,analyzing metallography,testing attachment,measuring thickness,investigating market and so on,and a conclusion is drawn that the burst is chemical burst.
采用宏观观察、化学分析、金相分析、内壁附着物化学成分分析、壁厚测量、市场调查等手段对近期发生的一起氧气瓶爆炸事故的发生原因进行了全面分析,得出该爆炸事故为典型的化学爆炸,气焊操作过程中的不当操作所造成的氧气与可燃气体的混合并达爆炸极限是本次爆炸事故发生的根本原因。
By analyzing the cases of oxygen cylinder accidences,we find out the main causes and possible ways and give the concept of "structure important degree" to describe the accidence.
应用事故树分析方法对氧气瓶爆炸事故进行分析,找出了引发事故的基本原因和途径,分析了基本原因事件的结构重要度。
Valves for oxygen cylinders
GB10877-1989氧气瓶阀
Valves for argon cylinders
GB13438-1992氩气瓶阀
accumulator air-charging manifold
蓄压器充气阀箱压缩空气瓶充气阀箱
Valves for dissolved acetylene cylinders
GB10879-1989溶解乙炔气瓶阀
Valves for liquefied petroleum gas cylinders
GB7512-1998液化石油气瓶阀
Liquid cylinders designed to dispense gaseous oxygen have valves equipped with standard Compressed Gas Association (CGA) outlets.
设计用来输出气态氧的液体钢瓶上装有配有标准的压缩气体协会排气口的阀门。
Air tightness test and safety valve adjusting for main air receiver( control air receiver, air horn receiver) on board.
主空气瓶（制空气瓶、笛空气瓶）船后气密试验和安全阀的调整。
Outlet connections and sizes for cylinder valves
GB15383-1994气瓶阀出气口连接型式和尺寸
General technique specifications for cylinder valves
GB15382-1994气瓶阀通用技术条件
Safety valves for marine air vessel
GB/T14087-1993船用空气瓶安全阀
Medical Gas Cylinders with Post-Type Valves
带有柱型阀门的医用气体钢瓶
Replace the cylinder outlet seal and valve cap.
替换钢瓶排气口密封和阀门帽。
The gas distribution system shall cover from the gas outlets on the benches or fume hoods to gas regulator manifolds at the cylinder area.
气体管路安装从气瓶站总阀门到工作台上各个气体阀门。
When returning cylinders to the supplier, properly close the cylinder valve, replace and secure any valve outlet seals, and properly install the cylinder cap.
钢瓶返还给供应商时，正确关闭钢瓶阀门，替换并固定阀门排气口密封，正确安装钢瓶帽。
11 Adapters to convert cylinder valves from one type of gas to another can lead to contamination and serious accidents. Their use is forbidden.
使用将一种气体瓶阀转换成另一种气体瓶阀的接头，会导致气体污染和严重事故，严禁使用。
Oxygen control valves consist of valve, actuator and accessories.
氧气调节阀由阀门,气动执行机构及附件组成.
After fitting of the valve, the valve should be maintained in a closed position to prevent any contamination from entering the cylinder.
连接好阀门后，阀门应保持关闭位置，为防止任何污染进入气瓶。
There should be a system in place ensuring traceability of cylinders and valves.
应有一个确保气瓶和阀门的可追溯系统。
