Die Forging Technology Studies for Preventing Macrograin of GH36 Alloy Forging;
预防GH36合金锻造粗晶的模锻工艺研究
This paper analyzed the technology of all kinds of spiders, and put forward the corresponding method of die forging technology.
对各种规格的十字轴进行工艺分析 ,并制定相应的模锻工艺方法。
The die forging process and die design of insert torque rod are finished and some key process measures are taken to ensure forging good parts.
6mm规格的插接式扭矩杆为例,在综合分析锻件工艺性的基础上,根据长轴类零件的模锻成型特点,选出了成型设备平锻机;同时,为了保证能够充满锻模型槽和顺利取出锻件,在模锻方式上选择开式模锻;完成了插接式扭矩杆的模锻工艺及模具设计,并采取了一些关键的工艺措施来保证锻出良好锻件;获得了一次性试模成功,进一步验证了该模锻工艺的可行性和模具设计的合理性。
Optimized scheme for die forging process of aluminum clamp
分析了396系列大功率高速柴油机2项铝卡箍新产品模锻件的锻造工艺性,提出了2项铝卡箍模锻件开发的总体优化方案,制定了2项铝卡箍锻件模锻工艺和锻模设计的具体实施优化方案,达到了2项铝卡箍新产品锻件开发优质、高效和低耗的效果。
Design of liquid forging die for shot's shell;
炮弹壳体液态模锻模设计
Research on Liquid Forging Mould Design Based on UG NX4.0;
基于UG NX4.0的液态模锻模具设计
The Research of CAPP System Based on GT for Design of the Forging of Liquid Metal;
基于成组技术的液态金属模锻CAPP系统研究
Effect of Liquid State Forming on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy
液态模锻对AZ91D合金组织和性能的影响
Study on Liquid State Die-forging Process for Pressure Intensifier Cover and Bottom of Magnesium Alloy
增压器盖、底镁合金液态模锻工艺研究
Liquid Die Forging Technology for 5083 Aluminium Alloy Flange
5083铝合金法兰盘液态模锻成形技术
Influence of Modificator on Mechanical Properties of Liquid Forging Aluminum Alloy
变质剂对液态模锻铝合金力学性能的影响
Research on Liquid Forging Process for Auto Wheel of Magnesium Alloy
汽车用镁合金车轮的液态模锻成形研究
Analysis of Defects and Protective Measure to the Forging Die Made by Squeeze Casting
液态模锻锻模常见缺陷分析及其预防
The Numerical Simulation of Motive Liquid Metal Velocity in the Electromagnetic Field;
电磁场中液态金属运动速度数值模拟
hydraulic hammer, mechanical, pneumatic or steam for forging metal or metal carbides
液压锻锤,机械式,气动或蒸汽推动,用于锻造金属或金属硬质合金
Numerical Simulation of Liquid Forging of Aluminum Alloy Wheels of Special Car;
特种车辆铝合金轮毂液态模锻成形中的数值模拟
Liquid die forging process analysis and die design for steering nut forging die
转向螺母锻模块液态模锻工艺分析及模具设计
Effect of Content of Mg,Cu and Zn on Mechanical Properties of Al-alloy Under Liquid State Forging
Mg、Cu和Zn含量对液态模锻铝合金力学性能的影响
Analysis on Hot Crack for Forging Die Made by Squeeze Casting
锻模液态模锻成形过程中热裂纹形成原因分析
Of or relating to metalworking or craft.
锻冶的金属锻冶的，与金属锻冶有关的
Dynamic study of hydraulic forging hammer based on elastic-viscoplastic body forging
基于锻件为弹黏塑性体的液压模锻锤动态研究
Molecular Dynamics Simulations of the Under-cooled Liquid Metal's Thermal Properties;
深过冷液态金属热物性的分子动力学模拟
Study on Tritium Inventory in the Liquid Metal Lithium-Lead Blanket Module of Fusion Reactors;
聚变堆液态金属锂铅包层模块氚分析研究
A Molecular Dynamics Simulation Study on the Solidification Process of Liquid Metal Nickel;
液态金属镍凝固过程的分子动力学模拟研究
