Study on hydrostatic extrusion technology of W6Mo5Cr4V2 high speed steel;
静液挤压W6Mo5Cr4V2高速钢的工艺研究
Experiments and simulation study on hydrostatic extrusion processes of magnesium alloy silk;
镁合金丝静液挤压物理模拟实验与数值模拟分析
Deformation behavior and structure of Zr base bulk amorphous alloy in supercooled liquid region by hydrostatic extrusion;
Zr基非晶合金在过冷液相区静液挤压的变形行为及结构
Typical deformation processing including rolling,swaging,and hydrostatic extrusion(cold hydrostatic extrusion,hot hydrostatic extrusion) are introduced.
综述了高密度钨合金材料形变强化工艺的研究进展 ,重点介绍了轧制、旋锻、静液挤压 (冷静液挤压 ,热静液挤压 )等形变强化工艺对高密度钨合金材料性能的影响及各种工艺方法的优缺点 ,指出了形变强化工艺在高密度钨合金生产领域方面的优势及应用前景。
In order to improve the densification of W-Cu composites,mechanical milling,liquid phase activation sintering,and hot hydrostatic extrusion technologies were used.
为了提高W-Cu复合材料的致密度,采用机械球磨-冷压制坯-液相烧结-热静液挤压-热处理工艺,制备出微观组织弥散分布、性能优异的W-35%Cu复合材料。
Typical deformation processing including rolling,swaging,and hydrostatic extrusion(cold hydrostatic extrusion,hot hydrostatic extrusion) are introduced.
综述了高密度钨合金材料形变强化工艺的研究进展 ,重点介绍了轧制、旋锻、静液挤压 (冷静液挤压 ,热静液挤压 )等形变强化工艺对高密度钨合金材料性能的影响及各种工艺方法的优缺点 ,指出了形变强化工艺在高密度钨合金生产领域方面的优势及应用前景。
To seek a way of densification of refractory metals and copper powders, a new method to make WCu composites by sintering and hot hydrostatic extrusion was put forward,and by using this method,some WCu40 samples with fully densification,fine microstructure,and good properties were successfully obtained.
为探索难熔金属和铜粉末混合坯致密化工艺,提出了钨铜粉末材料液相烧结和热静液挤压致密新工艺,经过实验获得了近致密、组织细小、性能优异的复合材料。
THE HYDRODYNAMIC LUBRICATION RESEARCH ON THE PROCESS OF HYDROSTATIC EXTRUSION;
静液挤压过程中的流体动力润滑研究
Technological Test and Simulation Study of Magnesium Alloy Warm Hydrostratic Extrusion;
镁合金温静液挤压工艺试验及仿真研究
A mathematics formula for the viscosity of working medium is given important theoretic foundation for HHE.
在此基础上,给出了挤压介质的粘度的数学关系式,为热静液挤压工艺奠定重要的理论基础。
hydrostatic extrusio
静水压挤压;静水压挤压;静液力挤压;静液力挤压;液力静挤压
CAD System Research of Side hydraulic Pressune Jar in Extrusion Modeling Presses Based on SolidWorks
基于SolidWorks挤压成形液压机侧液压缸CAD系统研究
The Study of Compacting Effect by Static Piling Driving and the Analysis of Measured Data;
静压桩沉桩挤土效应研究及实测分析
Analysis for the Setting and Compacting Effect of Jacked Pile in Soft Clay
软土地区静压桩设置及挤土效应分析
open center hydrostatic power steering system
开心式静液压转向系
closed center hydrostatic power steering system
闭心式静液压转向系
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
a press that is used to extract the juice from apples.
从苹果中提取汁液的挤压用具。
Identification and Control of the Process for Composite Forming by Liquid-Solid Extrusion;
复合材料液—固挤压过程辨识与控制
Research on Squeeze-Film Damping for Precision Hole Machining;
精镗孔挤压液膜阻尼理论及技术研究
Theoretical Analysis on Squeeze Flow of Electrorheological Fluid between Two Parallel Disks;
电流变液平行圆盘挤压流的理论分析
Study on Compacting Effects of Jacked Pile in Layered Ground and Its Prediction and Prevention;
成层地基中静压桩挤土效应及防治措施
Peak Ice Force in Ice Crushing on Vertical Structure;
冰与直立结构挤压破坏时的极值静冰力
Soil Compacting Problem of Jacked Pile and Research of Measures Diminishing Soil Compacting Effects;
静压桩挤土问题及减小其效应的措施研究
Study of Sinking-resistance and Compaction Effect of Static-press Pile;
静压桩施工沉桩阻力及沉桩挤土效应研究
