Effect of ultrasonically melt treatment method on solidification structure of pure aluminum ingot;
超声波熔体处理方法对纯铝铸锭凝固组织的影响
Research on Bulky Compound of 7A52 Alloy Ingot under Funnel;
7A52合金铸锭漏斗底结物形成原因
Effects of 5083 aluminium alloy ingot homogenizing on properties and structures of ingot and plates;
5083铝合金铸锭均匀化处理对铸锭和板材组织与性能的影响
Effects of Melt Treatment Methods on Degassing Efficiency of Ultrasonically Refined Al-1.65%Si ingots Under Different Ultrasonic Frequencies;
不同超声波频率下熔体处理方法对Al-1.65%Si铸锭除气的影响
Effect of Ultrasonic on Structure of Aluminum Alloy Ingots;
超声波对铝合金铸锭组织的影响
In this study,the effect of ultrasonic treatment time on crystallization structure of industry pure aluminum ingots was investigated.
研究了超声波处理时间对工业纯铝铸锭结晶组织的影响,即添加除气剂又进行超声波处理的情况。
ingot mould of metal for use in metal
金属铸造金属铸锭模
Quality Control of Recycling Magnesium Alloy Ingot and the Casting Machine Design;
再生镁合金铸锭质量控制及铸锭机设计
Melting and Casting Process Investigations on Large Size Ingot of AA5182 Al-Mg Alloy;
AA5182大型Al-Mg合金铸锭熔铸过程研究
Research on Homogenization and Mass Transfer in AZ61 Magnesium Alloy Ingot;
铸态AZ61镁合金铸锭均匀化处理及扩散传质研究
Quantity and Influences in the Casting Lies the First Area of Cooling and Crystallize in Common Mold
普通模铸造一次冷却结晶区的铸锭质量及影响
Effects of Casting Process on Ingot Microstructure and Forgeability of B30 Alloy
铸造工艺对B30合金铸锭组织及可锻性的影响
Design of 2124 aluminium alloy 255 mm×1500 mm ingot specification casting tool
2124铝合金255mm×1500mm铸锭专用铸造工具的设计
Effect of Processing Parameters on the Thickness of Outside Layer of 7075/6009 Aluminum Alloy Ingots
铸造参数对7075/6009铝合金铸锭外层厚度的影响
Zirconium and zirconium alloy ingots for nuclear application
GB/T8767-1988核工业用锆及锆合金铸锭
In the case of rimming steel, no or some deoxidation is carried out before casting.
沸腾钢在铸锭前不脱氧或轻度脱氧。
Influence of Heat Treatment on Segregation of TB6 Alloy Ingots
热处理对TB6合金铸锭偏析的影响
Study of Production Process for BFe10-1-1 Casting Ingot
BFe10-1-1铸锭生产工艺研究
Zinc alloy ingots for casting
GB/T8738-1988铸造锌合金锭
Aluminium alloy ingots for casting
GB/T8733-1988铸造铝合金锭
Bearing alloy ingots for casting
GB/T8740-1988铸造轴承合金锭
The moulds are made of cast iron.
钢锭模是用铸铁做的。
Bronze ingots for casting
GB/T8739-1988铸造青铜锭
Brass ingots for casting
GB/T8737-1988铸造黄铜锭
