Microcellular foam injection moulding process is developed in this background.
微细发泡注塑成型就是在这个背景下所开发和研究的一项新技术,该技术通过在塑料熔体中加入超临界的CO2或者N2,使得在注塑制品内部形成致密的微孔,大小为5～100μm微孔的存在能够大大节约塑料原料,同时使得塑料制品具有较好的机械性能。
Firstly, the mechanism of microcellular foam injection moulding is analyzed by researching the classical nucleation theory model, and the difference between the classical nucleation theory and the actual nucleation performance was raised,the reason for this is the free energy change of polymer is ignored in the classical nucleation .
首先,本文从研究经典成核理论原理着手,分析了微细发泡注塑成型的成核机理,提出经典成核理论与实际成核过程存在的差别,指出造成这些差异的主要原因是由于超临界气体溶入到聚合物熔体中,引起聚合物基体的自由能变化,而在经典成核理论中没有考虑这些因素引起的体系自由能的改变。
Research on the Effect of Process Parameters of Microcellular Foam Injection Moulding on Cell Configuration
微细发泡注塑成型工艺对泡核形态影响的研究
Research on Key Technologies of Microcellular Foam Injection Moulding Process
微细发泡注塑成型工艺的关键技术研究
Effect of Injection Processing on PP/Mica Powder Foaming Behavior
注塑工艺对微发泡PP/云母粉发泡行为影响
injection forming machine of micro-foam type
注射微孔发泡成型机
DEVELOPMENT OF INJECTION FOAMING PROCESSING OF WOOD-PLASTIC COMPOSITES
木塑复合材料注塑发泡成型技术的研究
Rice-Husk/Polypropylene-LDPE Microcellular Foaming Composite
稻壳/PP-LDPE微孔发泡木塑复合材料
The properties, formation theory and technologies of microcellular foam plastics are introduced, and the technological difficulties in the formation of microcellular foam plastics are analysed.
详细介绍了微孔泡沫塑料的性能、型原理和成型技术,具体分析了微孔泡沫塑料成型的技术难点。
Microcellular Foaming Wood Plastics Composites of PP and LDPE Blending
PP与LDPE共混微孔发泡木塑复合材料的研究
A Study on the Foaming Process of Microcellular Foams and Using Nano-Particles as the Carrier to Make Blowing Agent by Inserting;
微孔泡沫塑料发泡过程及以纳米粒子为载体插层制备微发泡剂的研究
Study on Mold-filling Flow and Technique of Microcelluar Foam Injection Molding;
微孔发泡注射成型充模流动及工艺研究
Study on the Preparation and Characterisation of Injection Molding Micro-foaming PP
注射成型微发泡聚丙烯的制备及性能研究
Fabrication of Microcellular Bamboo Plastic Composite and a Preliminary Study on Its Properties
竹塑微发泡复合材料的制备及其性能的初步研究
Study on Ultrastructure of the Follicle Cells in the Development of Oocytes in Sika Deer
东北梅花鹿卵泡发育过程中卵泡细胞超微结构的观察
Study on Mechanism and Technology of Precision and Microcellular Injection Molding;
精密注塑与微孔注塑机理及技术研究
Introduce the application of the optical image technology in the study of formation of microcellular foams to observe the nucleation and growth of bubbles.
提出了在微孔泡沫塑料的成型研究中,利用光学成像技术来观察挤出熔体中的发泡情况的方法。
A mass of bubbles of air or gas in a matrix of liquid film, especially an accumulation of fine, frothy bubbles formed in or on the surface of a liquid, as from agitation or fermentation.
泡沫一种在液体表面或内部由于搅动或发酵起泡形成的轻而发白且成微细泡沫状的物质
Process Research on Fabrication of Micro-injection Mold Cavity of Cell Culture Device Based on UV-LIGA Technology
基于UV-LIGA制作细胞培养器微注塑模具型腔的工艺研究
closed cell elastomeric insulation
密封微孔泡沫橡塑隔热材料
