Lightning is a common phenomenon of spark discharge of the air in the troposphere.
闪电是常见的对流层大气火花放电现象 。
And high amplitude lightning current is fed to grounding grids,spark discharge will be generated.
当高幅值的雷电流经接地装置注入接地网,接地网周围的土壤会发生火花放电。
Research on characteristic of electromagnetic wave radiated from spark discharge not only can help us to reduce its harm,but also can help us to develop its application.
火花放电是一种重要的电磁干扰源。
This paper introduces an experiment of the 10 gap pseudospark discharges driven by Marx generator directly.
介绍了采用 Marx脉冲发生器直接驱动十隙虚火花放电室放电的实验。
The experiment result of a high voltage pseudospark discharge driven by a pulse line accelerator is presented.
介绍了用脉冲线加速器作驱动电源产生高压虚火花放电的实验。
The experiment of pseudospark discharge is discussed in this article.
介绍了虚火花放电实验 。
The initiation phase of pseudospark discharge in a hollow cathode via PIC/MCC simulation;
空心阴极类火花放电初始电离过程的PIC/MCC模拟
lepel quenched spark-gap
盘形猝熄火花放电器
spark discharge particle generator
火花放电粒子发生器
sometimes termed sparkover or flashover when the discharge is on the external surface
当放电在外表面时称为火花放电或闪络
fixed spark-gap modulator
固定间隙火花放电调制器
Research on the Influence of Spark Discharge to HCCI Combustion Process;
火花放电对HCCI燃烧过程影响的研究
Selectivity of Spark Discharge Paths in Point/Point Gap in Air
尖端-尖端的火花放电路径的选择性
Surface Modification Technology of EDM with Silicon Electrode
硅电极电火花放电的表面改性技术研究
Large static charges may build up in the bed causing spark discharges.
大量静电荷可能在床内积聚而引起火花放电。
Real-time Detection and Discrimination of Discharging States in Micro Electrical Discharge Machining;
微细电火花放电状态的实时检测和辨识技术
The Methods and Programming of Electrical Discharging States in Micro Electrical Machining;
微细电火花放电状态智能检测方法及程序设计
Study on the Discharge Status Detecting of EDM Based on Wavelet Transform
基于小波变换的电火花放电状态检测与分析
It may limit the amount of sparkover to an acceptable rate.
它可把火花放电频率控制在允许范围内。
triggered spark gap
触发放电器触发火花隙
Investigation of the igniting capability of ESD sparks
典型静电放电火花点燃能力测试研究
Study on the Discharge Mechanism and Technology in Powder-mixed EDM;
混粉电火花加工放电机理及工艺研究
electric ignition
电火花点火,电气点火
Simulation of Discharge Channel for Non-conductive Ceramics During Electrical Discharge Machining
非导电工程陶瓷电火花加工放电通道模拟
Study on volt-ampere properties in WEDM
电火花线切割加工中放电间隙伏安特性的研究
