A special instrument has reseached by BAMTRI for nondestructive testing the thickness of flame sprayed aluminum coatings(FSAC) for composites’ fabrications.
介绍了我所研制的复合材料制件表面火焰喷铝涂层厚度的专用测量仪器——喷铝表层电阻测量仪的工作原理和技术特征,并分析了其测量不确定度。
WC/Ni coating was made on TC4 alloys surface by using flames spray-welding,and the microstructure, composition,phase structure and microhardness of the coating were tested and analyzed.
采用火焰喷焊技术对TC4合金表面喷焊Ni基WC。
The possibility of Ni-based WC coating on titanium alloys substrate through flames spray-welding technique was explored,and the microstructure and properties of the coating were determined using SEM,XRD and so on.
研究了在钛合金Ti-6A l-4V表面上采用火焰喷焊技术制备镍基碳化钨型自熔性合金涂层的可行性,利用SEM、XRD等手段分析了它的组织和性能。
Two kinds of Ni-base coatings with 0% and 4% La2O3 addition respectively on titanium alloys substrate made by flames spray-welding technique were prepared, and their microstructure, elemental distribution, micro-hardness and tribological properties under dry sliding against steel were studied.
采用火焰喷焊技术在钛合金基体上制备了不加La2O3和加4%(质量分数)La2O3两种镍基涂层,分析了它们的显微组织、合金元素的扩散、显微硬度以及耐磨性能。
Effect of laser remelting and tempering on microstructure and properties of flame spray-welded Ni-based alloy coatings
激光重熔及回火对Ni基合金火焰喷焊层组织和性能的影响
oxygen-acetylene flame spraying coating
氧－乙炔火焰喷涂涂层
The loss of C,B,Si,Cr and other elements in coatings decreases in the order of plasma,autogenous and faradic spraying.
焊层中的C、B、si、Cr等元素烧损率以等离子堆焊最大,火焰喷焊重熔次之,感应熔焊最小;
Powder flame spray and spray fusig gun,with various powder nozzles attached, can do spray coating with fine metallic powder and ceramic powder.
粉末火焰喷涂喷焊设备，配有各种粉末喷嘴，能喷涂金属微细粉末和氧化物涂层。
Powder flame spray or spray fusing gun can be used with inert gas to feed powder with best coating effects,and can also be used for spary of ceramic powder.
粉末火焰喷涂喷焊设备。用惰性气体送粉，能得到更佳涂层品质，也可喷涂氧化物涂层。
Influence of Adding Re-melting on Porosities of Spray-welding Coating on Titanium Alloys Surface and Cause of Porosities
钛合金表面火焰喷焊涂层中气孔的成因及增加重熔对气孔的影响
Study on Wear Resistance of Tillage Stubble Machine Chopper with Flame Powder Spraying and Welding;
根茬还田刀具火焰喷焊耐磨性强化研究
The Application of Flame Spray Welding Technology in CSP Running Table
火焰热喷焊技术在CSP输送辊道上的应用
Study on HVAF WC Coating Sprayed at Aluminum Substrate;
铝基高速火焰喷涂WC涂层性能的研究
The Properties of Flame Sprayed EAA/n-SiO_2 Composite Coatings
火焰喷涂EAA/n-SiO_2复合涂层热力学性能
Flames jetted out (of the nozzles).
火焰（从喷嘴中）喷出来了.
flame laminating
火焰胶合法,火焰层压法
The Properties of Flame-sprayed Nylon1010 and Its Composite Coatings;
火焰喷涂尼龙1010及其复合涂层结构与性能
Preparation and Characteristics of Biocoatings on Ti6Al4V by High Velocity Flame Spraying;
Ti6Al4V高速火焰喷涂仿生生物涂层制备及特性
Study on Coating from Ternary Boride Cermet by Reactive Spraying;
反应火焰喷涂三元硼化物金属陶瓷涂层的研究
Microstructure and Properties of Mo_2FeB_2 Ceramic Coating by Reactive Flame Spraying
反应火焰喷涂Mo_2FeB_2金属陶瓷涂层的组织和性能
Laser Heat Treatment of HVOF WC-Cr_3C_2-Ni Coating
WC-Cr_3C_2-Ni超音速火焰喷涂层的激光热处理
Study on Preparation of Ni-Al Alloy Flexible Wire and Properties of Its Coating Deposited by Flame Spraying
火焰喷涂镍铝合金柔性线材及涂层性能的研究
