Effects of surface-to-nozzle distance and high-temperature plate's surface temperature on spray cooling heat transfer coefficient;
喷雾冷却中射流出口高度和高温钢板表面温度对换热系数的影响
Rule Optimization Algorithm in Spray Cooling Cutting Applied Research;
规则自寻优算法在喷雾冷却切削中的应用研究
Experimental study of temperature non-uniformity on spray cooling surface;
喷雾冷却发热壁面温度非均匀性实验研究
The Research on Temperature Fields of Hot Forging Die and Design of Spraying Cooling and Lubricating System;
圆柱体开式热锻模温度场分析与喷雾冷却润滑系统设计
Advantages of spraying cooling tower are expounded using thermodynamics theory.
分析了循环水 PVC填料冷却塔的本身问题 ;应用热力学理论 ,阐明了喷雾冷却塔的优越性 ;在总结喷雾推进冷却装置应用经验的基础上 ,探讨了不同情况下的两种应用方案。
Experimental study is performed on the mist cooling of heated high temperature surface covered by a sand layer to investigate the effects of both sand size and thickness of sand layer on heat transfer charateristics in order to enhance heat transfer of film boiling region.
研究了高温金属面上覆盖砂层后的喷雾冷却换热特性，测试了砂粒颗粒大小和砂层厚度对换热特性的影响。
A theoretical study has been conducted on the velocity ratios of small water droplets to air flow, especially the impinging velocity ratios on the hot surface in air-ato-mized mist cooling.
在喷雾冷却时喷雾流中液滴和空气流的速度比（尤其是在传热平面上的冲击速度比）是支配喷雾冷却特性的一个重要参数。
The advantages and disadvantages of the mechanical cooling towers are compared with that of the spraying cooling towers.
应用热力学理论,阐明了喷雾通风冷却塔的优越性,比较了机械型冷却塔和喷雾冷却塔的优缺点。
According to the principle of atomization cooling,the parallel & counter-flow no-padding spraying cooling tower and the counter-flow no-padding spraying cooling tower were established.
根据雾化冷却原理,建立了逆顺流式无填料喷雾冷却塔和逆流式无填料喷雾冷却塔,在介绍了30 t/h试验用逆顺流式和逆流式无填料喷雾冷却塔的结构和性能的基础上,通过试验对两种冷却塔的冷却性能进行了研究,试验结果表明:当设计风量相同时,逆流式无填料喷雾冷却塔的实测风量比逆顺流式无填料喷雾冷却塔的实测风量大5。
The Layout Design of Nozzle in Water Spray Cooling System for Spherical Tanks;
球罐水喷雾冷却系统的喷头布置设计
Review of spray cooling technique and prospect of spray cooling using nanofluids
喷雾冷却技术综述及纳米流体喷雾应用前景
The Use of Spray Cooling Technology to Direct Air-cooling System
直接空冷系统中喷雾冷却技术的应用
Experimental Investigation of Surfactant Effects in Spray Cooling
添加表面活性剂的喷雾冷却实验研究
Heat transfer performance of inclined spray cooling in non-boiling regime
倾斜喷射时喷雾冷却无沸腾区换热特性
Numerical Simulation and Analysis on Spray Cooling System in the Direct Air-cooled
直接空冷中喷雾冷却系统数值模拟和分析
Spray Liquid-film Flow Theory and Experimental Study of Spray Cooling of Electronic Devices
喷雾液膜流动理论及电子器件喷雾冷却实验研究
Fundamental Research on Cryogenic Pneumatic Mist Jet Impinging Cooling Based on Green Manufacturing;
基于绿色制造的低温气动喷雾冷却的基础研究
Study on Heat Transfer Mechanism in Spray Cooling and Terrestrial Simulation of Heat Transfer in Space
喷雾冷却传热机理及空间换热地面模拟研究
Experimental Study on Heat Transfer and System Simulation of Spray Cooling
喷雾冷却换热特性实验研究及其系统仿真
Experimental and Numerical Study of the Spray Cooling and Its Influencing Factors
喷雾冷却及其影响因素的实验与数值研究
EFFECTS OF PRESSURE AND FLOW FLUX ON HEAT TRANSFER IN SPRAY COOLING
压力与流量对喷雾冷却换热特性的影响
Evaporation Characteristics of Single R404a Droplet in Laser Treatment of PWS in Conjunction with Cryogen Spray Cooling
激光手术喷雾冷却中R404a液滴的蒸发特性
Experimental Investigation of Non-boiling Spray Cooling with Low Surface Temperature and Big Water Flow Rate
低温表面大流量无沸腾喷雾冷却试验研究
Numerical study on the effect of secondary nucleation on spray cooling
数值研究“二次成核”在喷雾冷却中的作用
The Research on Temperature Fields of Hot Forging Die and Design of Spraying Cooling and Lubricating System;
圆柱体开式热锻模温度场分析与喷雾冷却润滑系统设计
Experiment Study on Non-Boiling Heat Transfer Performance Spray Cooling for High-Power Laser
大功率激光器喷雾冷却中无沸腾区换热性能实验研究
Application of Spraying-Ventilating Cooling Tower Cycle Cooling Water System
喷雾通风冷却塔在循环冷却水系统中的应用
