Methods 202 FUO patients were chosen and their causes were categorized,the fever type and changes of fever process were observed by the curves of temperature changes.
目的分析不明原因发热(FUO)患者的病因,观察发热热型和热程变化,评价降温护理效果。
Cu-Sn alloy wires were prepared by the "heated-mold continuous casting+cold deformation+ recrystalliza- tion annealing + cold deformation" technics.
通过"热型连铸法+冷拔+再结晶退火+冷拔"工艺制备的Cu-0。
The contrast of heated-mold continuous casting of copper rod experiments on two different structural molds were carried out.
用两种结构铸型进行了热型连铸铜杆对比试验研究,结果表明,提高铸型温度梯度有利于稳定固液界面的位置,从而扩大热型连铸工艺参数配合的范围。
By approprizte process parameters,the Al-1%Si alloy wire with good surface quality and unidirectional dendritic crystal was fabricated on the self-made horizontal heated-mold continuous casting equipment.
在自制的水平热型连铸设备上,采用一定的工艺参数,制备出了表面呈镜面,内部组织沿轴向定向排列的柱状晶Al-1%Si线材,其与金属型生产的多晶线材相比,屈服强度提高40%,伸长率提高35。
Research in mechanical properties of heated mold continuous casting Cu-Al-Be super-elastic alloy wires;
热型连铸Cu-Al-Be超弹性合金丝机械性能的初步研究
The cold-working property of Cu-Al-Mn superelasticalloy cast by heated mold continuous casting;
热型连铸超弹性Cu-Al-Mn合金的冷加工性能
Effects of Ti addition on grain growth of Cu-Al-Ni alloy cast by heated mold continuous casting process;
Ti对热型连铸Cu-Al-Ni合金晶粒长大的阻碍作用
Numerical Simulation of Influence of Processing Parameters on the Position and Shape Features of Liquid-solid Interface in Ohno Continuous Casting (OCC);
热型连铸工艺参数对液固界面形状位置特性影响的仿真
Application of PLC in Temperature Control Systems of OCC;
PLC在热型连铸温度控制系统中的应用
The Mg-Al eutectic alloy wires with 5 mm diameter were manufactured successfully using Ohno Continuous Casting(OCC).
利用热型连铸法(OCC),成功拉制出φ5 mm的Mg-Al共晶合金线材。
3-D Simulation of Microstructure of Pure Cu in Heated Mould Continuous Casting;
纯铜热型连铸过程三维微观组织模拟
Numerical Simulation of Microstructure Formation during Solidification Process in Heated Mould Continuous Casting;
热型连铸凝固过程微观组织形成的数值模拟
By appropriate process parameters,the Ag-Cu-Zn alloy ingot with good surface quality and even unidirectional microstructure was fabricated on the self-designed horizontal heated mould continuous casting apparatus.
在自制的水平式热型连铸设备上,选用合适的工艺参数制备出了表面质量良好、内部组织沿轴向均匀分布的Ag-Cu-Zn合金铸棒。
Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号