Analysis of Equivalent Circuit for Radial Coupling Multi-cavity Resonators;
多腔径向耦合输出系统的等效电路分析
Design of Compression Mould with Multi-cavity, Vertical Parting and Secondary Ejector Pins;
垂直分型二级推件多型腔压模设计
Multi-cavity injection mold is used widely in practice, and filling balance is recognized as the most important problem in multi-cavity molding.
多型腔注射模在实际生产中有着广泛应用,充填平衡是保证多型腔模塑制品质量均匀一致的关键。
A method for automatical balancing multi-cavity injection molds is presented with the aid of flow simulation.
给出一种基于流动模拟的多型腔注塑模流动平衡计算方法 ,在流道和型腔布置确定后 ,根据流动模拟的结果 ,通过迭代调整流道和浇口尺寸 ,自动实现非平衡布置多型腔注塑模的流动平衡。
Nnumerical simulation of the porthole die extrusion of lacunaris panel is made using the forging software.
应用Pro/E建立分流组合模的几何模型,利用锻造专用有限元软件对多腔壁板铝型材挤压过程进行数值模拟,获得挤压过程中的挤压力、应力场、速度场及金属填充和流动情况,提供了选择挤压设备的依据,对同类产品工艺开发及模具设计具有一定的指导意义。
With the development of CAD/CAE in production, AL6063 alloy Lacunaris panel profile is analyzed.
随着CAD/CAE技术在实际生产中的广泛应用,本文以平面分流组合模挤压Al6063多腔壁板型材为研究对象,通过三维造型软件Pro/Engineer创建了多腔壁板铝型材平面分流组合模型,利用刚塑性模拟软件Deform-3D对型材挤压过程进行了模拟,从而实现了对模具参数的优化。
Rapid microwave sintering of low dielectric loss ceramics was studied in multimode cavity, also was investigated microstructure and properties of ceramics after microwavesintering.
研究了多模腔微波烧结系统对低损耗陶瓷材料快速烧结及其显微结构与性能。
Influence of liquid on vibration characteristics of boxed multi-tanks structure
充液对箱形多腔结构振动特性的影响
Polarization Properties of Multi-cavity Thin-film Interleaver
多腔薄膜梳状滤波器的偏振特性研究
bellows extension
皮腔延长度，多指近摄
Objective: To study the causes of left nasal cavity bleeding occurs more than right.
目的探讨左鼻腔出血多于右鼻腔出血的原因。
Results: Left nasal cavity bleeding occured more than right.
结果由于人类进化遗传的结果,左鼻腔血压高于右鼻腔血压,左鼻腔出血多于右鼻腔。
syndrome of circumorificial plasmacytosis
腔口周围浆细胞增多综合征
An excessive accumulation of serous fluid in tissue spaces or a body cavity.
水肿组织间或体腔内脓液的过多积累
(4) pleurorrhea and pleural thickening are most commonly seen in SLE .
(4)胸腔积液、胸膜增厚以SLE最多见 ;
The throat and mouth support a variety of microorganisms.
咽喉与口腔中也存在着许多微生物。
She is spouting unwanted advice.
她在装腔作势地说出多余的忠告。
How long does the casting stay in the mold before shake?
落砂前铸件在型腔里停留多长时间？
Mature teratomas of the mediastinum are benign lesions.
纵膈腔之成熟畸胎瘤大多是良性病变。
Multi-qubit Quantum Information Processing in Cavity QED;
在腔QED中实现多量子比特信息的处理
An Approach of the Tune Patterns of the Man-Han Tune in Ordos Area;
浅谈鄂尔多斯地区蒙汉调的腔调特点
Realization of Multi-qubit Quantum Logic Gates Based on Cavity QED
基于腔QED的多比特量子逻辑门的实现
Current researches and capabilities of multifunctional intracardiac echocardiography
多功能心腔内超声技术的研发及应用
Multifactorial Analysis of Oral Mucosa Candidiasis in Adults
成人口腔黏膜念珠菌病的多因素分析
Aortic Dissection:CT Fetures that Distinguish True Lumen from False Lumen
主动脉夹层真假腔的多层螺旋CT特征
