These algorithms can realize inter-projector intensity matching, edg.
针对这些问题,分别采用了直接逼近、二次曲线衰减及μ比例修正算法和相应的实现方法,对这类显示系统的投影面间的亮度匹配、边缘融合以及投影面内的亮度均衡进行实现,并提出亮度偏差对均衡效果进行衡量。
In order to achieve intensity matching,two method of evaluating real-virtual intensity are proposed based on the theory of dealing with the imaging intensity.
为了获得虚实物体的亮度匹配,根据图像亮度处理的原理,对增强现实系统的虚实环境提出了整体和局部两种亮度评价算法,并对新型光学透视式头盔显示器的亮度匹配算法进行了改进,提高了系统效率。
These algorithms can realize inter-projector intensity matching, edg.
针对这些问题,分别采用了直接逼近、二次曲线衰减及μ比例修正算法和相应的实现方法,对这类显示系统的投影面间的亮度匹配、边缘融合以及投影面内的亮度均衡进行实现,并提出亮度偏差对均衡效果进行衡量。
This research is to find out the effects of light level, visual angle and eccentricity on the spectral sensitivity of human eyes at mesopic region; to validate the possibility of working out the spectral luminous efficacy curves based on visual performance at mesopic light levels; to find the connection between the results of performance-based method and brightness-matching method.
本论文主要研究照明水平、目标大小和目标偏心度等因素对中间视觉(Mesopic Vision)状态下视觉功能的光谱响应特性的影响;探讨在视觉功能的基础上获得人眼光谱光视效率的可能性以及基于视觉功能法(Performance-based Method)和传统的视亮度匹配法(Brightness-matching method)之间所存在的联系。
To obtain the expression of maximum spectral luminous efficiency of mesopic level,we studied the contribution to spectral sensitivity in the mesopic region of the rods and cones based on heterochromatic brightness matching and reaction time,respectively.
为了获得中间视觉时光视效能最大值表达式,分别利用异色视亮度匹配法和反应时间法,研究了在中间视觉条件下人眼中的锥状感光细胞和杆状感光细胞对视觉效果的贡献程度,获得了中间视觉时的光视效能最大值表达式,提出了用不同的实验方法得到的结果反映人眼的不同视觉特性,在进行照明计算和评价时,应根据不同的应用和目的,选择相应的光视效能最大值表达式的观点,建议在评价夜景照明效果时宜采用异色视亮度匹配法获得的光视效能最大值,对于道路照明设计,宜采用反应时间法确定的光视效能最大值进行计算。
Study on the Matching Thickness of the Microwave Absorbing Coating with Fiber X as Absorbing Agent
纤维吸收剂型吸波涂层的匹配厚度研究
A Study on Acoustic Impedance Matching Criteria for Coating Thickness Measurement by Ultrasonic Interferometry
超声干涉法涂层厚度测量声阻抗匹配判据研究
The Influence of Dentin Porcelain Layer Thickness on the Color Match of Metal Ceramic Restorations;
体瓷厚度对金属烤瓷修复体颜色匹配性影响的研究
Optimum design of throttle slice thickness and its characteristic test for telescopic damper with damping matching
最佳阻尼匹配减振器阀片厚度优化设计与特性试验
Acoustic Impedance Matching Criteria and Their Applications for Layer Thickness Measurement by Ultrasonic Interferometry
超声干涉法薄层厚度测量声阻抗匹配判据及其应用
Epitaxy: Concerns/ constraints- lattice-matched systems; strained layers( pseudomorphic)- limits of thickness; impact of strain on bands, properties.
磊晶：关键与限制-晶格匹配之材料系统；应变层(晶)-厚度上限；应力对能带的影响，特性。
Many-to-One Matching Decision Based on Correction of Perturbation for Matching Measure Matrix
基于匹配度量矩阵扰动校正的多对一匹配判决
Fuzzy map-matching algorithm with confidence feedback for vehicle navigation
车辆导航中带匹配度反馈的模糊地图匹配算法
Person-Organization Fit and Job Satisfaction:Comparative Research on Value Congruence,Need-Supply Fit and Demand-Ability Fit
个人-组织匹配与工作满意度——价值观匹配、需求匹配与能力匹配的比较研究
For Match Size, select Match Width, Match Height, or Match Width and Height.
为匹配大小,选择匹配宽度,比赛高度或者比赛宽度和高度.
Research on velocity plus angular rate match transfer alignment
速度加角速度匹配传递对准方法研究
Effect of native fit and created fit on the effectiveness of sports sponsorship
原始匹配度与创意匹配度对体育赞助有效性的影响研究
Research on Welding Seam Spacing and Rod Wall Thickness Matching Characteristic of Coach Skeleton Joint
客车骨架接头的焊缝间距与杆件壁厚匹配特性研究
The Mechanism of the Effect of Person-Job Matching and Person-Organization Matching on Work Attitudes;
人-职务匹配、人-组织匹配对员工工作态度的效应机制研究
Person-Job Fit,Person-Organization Fit and Job Satisfaction:The Moderating Role of Leader-Member Exchange;
P-J匹配,P-O匹配与工作满意度的关系:LMX的调节作用
The Research on Acquiring the Initial Value of Registering Range Images by ICP
获取ICP匹配深度图像初值的研究
DOES THE LR WHEEL SPEED MATCH THE OTHER WHEELS?
左后轮速度与其他轮匹配？
DOES THE RR WHEEL SPEED MATCH THE OTHER WHEELS?
右后轮速度与其他轮匹配？
