Non-linear model for calculating internal stress of injection-molded polymers;
聚合物注塑成型内应力数值计算的非线性模型
Non-linear viscoelastic constitutive equation to calculate internal stress of injection molded articles;
注塑制品内应力计算的非线性黏弹性本构方程
Study on internal stress of Fe-Ni-P alloy coating;
Fe-Ni-P合金镀层内应力研究
On the inner stress of UPR filled with CaCO_3 during curing;
CaCO_3含量对不饱和聚酯树脂固化内应力的影响
Influential factors of inner stress in electroformed nickel–cobalt alloy;
电铸镍钴合金中内应力的影响因素
The results showed that mould temperature affected inner stress and it was the main factor inducing crazing defect.
对聚醚酰亚胺过滤器壳体注射成型制件的缺陷尤其是开裂缺陷进行分析,发现模具温度的高低直接关系到制件的内应力大小,是引起开裂缺陷的主要原因;指出生产成型温度较高的工程塑料制品时,在工艺设计编制中要对模具温度提出相应的要求,并严格加以控制。
Factors affecting innerstress of nickel deposits and their trouble-shootings;
影响镍镀层内应力的因素及排除方法
Investigation on residual stress in Ag-MgF_2 composite films prepared by vacuum deposition;
在Si基底上真空蒸发沉积Ag-MgF_2复合薄膜的内应力研究
Stress Simulation and Rolling-thoroughness Analysis of Aluminum Alloy Plate in Conversable Hot Rolling;
大规格铝材可逆热轧内应力仿真及轧透性研究
Effects of thickness on the residual stress in Cu films;
薄膜厚度对蒸发制备Cu膜内应力的影响
Effect of annealing on surface morphology and residual stress of sputtered ZnO thin film;
退火对溅射ZnO薄膜的形貌和内应力的影响
The progress in the surface pretreatment techniques and the characterization of residual stress of diamond film are introduced in detail.
概述了CVD金刚石涂层硬质合金刀具的研究现状及存在的问题,重点对近五年CVD金刚石涂层硬质合金刀具基体预处理方法、涂层内应力的表征方法等方面的研究现状进行了综述。
Effect of internal stresses on giant magneto-impedance in glass-covered Co-rich amorphous wire;
内应力对玻璃包覆钴基非晶丝巨磁阻抗的影响
The continuity of electron density responsible for the internal stresses at surfaces in contact and the continuity of chemical potential causes transference of electrons fro.
材料特性不仅取决于薛定谔方程解的相互作用项，还取决于不同样片的间界面和边界条件：界面之间的电子密度和化学势连续，由于自由表面上电子的量子条件产生隧道效应而形成量子袋，当不同材料相接触时，间界面两侧电子密度必须连续而产生内应力，电子的化学势必须相等造成电子的迁移而形成二极层。
Glass containers--strees examination--method of test
GB/T4545-1984玻璃瓶罐内应力检验方法
Glassware--stress examination methods
GB/T15726-1995玻璃仪器内应力检验方法
THE EFFECT OF INTERNAL STRESS ON THE CRYSTALLIZATION OF CIS-1,4 POLYBUTADIENE
内应力对顺-1,4-聚丁二烯结晶的影响
Study on Texture and Internal Stress of Electrodeposited Copper Film;
电沉积铜薄膜中织构与内应力的研究
Analysis of the lowering of the internal stress of PC moulding;
浅析PC注塑成型中降低内应力的方法
These interior tensions are caused by the wedging action within the neighboring compressively stressed layers.
这些内部的拉应力是由邻近压缩应力层内的劈开作用而引起的。
Study on Secondary Internal Force and Redistribution of Internal Force about Two-span Prestressed Concrete Frame;
两跨预应力混凝土框架次内力及内力重分布规律研究
Biomechanic comparision between the"U"shape lumbar dynamic fixation system and traditional fixation system
腰椎弹性内固定与刚性内固定的应力对比研究
Internal Forces Redistribution and Stresses Redistribution Analysis of Continuous and Prestressed Concrete Girder Bridges
预应力混凝土连续组合梁桥的内力重分布与应力重分布分析
In Back-Prestressing Force Frame Work, the Concept of "Sub-Internal Force" Caused by Prestressing Force and the Method for It;
后张预应力框架结构中，预应力引起结构"次内力"的概念及计算方法
Earth quake can result from stress in the earth 's crust
地壳内的应力可能引起地震
Stress is a chemical reaction that takes place inside the body,
压力是身体内部发生的化学反应，
We would like to know the tensile stress in the wall.
我们很想知道壁内的拉应力。
Earth quakes can result from stresses in the earth's crust.
地壳内的应力可能引起地震。
The use of computer to calculate internal force in double-hole case culvert
计算机在双孔箱涵内力计算中的应用
Internal and External Logistics Capability in Distribution System;
供应链分销系统内外部物流能力研究
Conception and Constitution Research of Emergency Logistics Capability;
应急物流能力的内涵剖析与构成体系
On the Gravity Line and It s Application in the Neijiaquan of Wushu;
浅谈武术内家拳中的重力线及其应用
