PROBE INTO THE PROCESS OF PRODUCING LUSTROUS TRILOBAL AND FINE DENISR PET FDY;
有光细旦三叶形涤纶全牵伸丝生产技术
The process technique for new products 16 7 dtex/5f Nylon 6 drawn yarn prepared from bright 20 5 dtex/5f polyamide 6 POY on DCS texturing machine (England)was introduced.
7dtex/5 f牵伸丝的设备工艺技术 ,比较了国内外用平行牵伸机生产的牵伸丝与用 DCS型加弹机加工的牵伸丝的质量指标及产品性能。
According to the special requirement of Raschel, the author of this chapter give rise tothe technical parameters of polyester drawn yarn especially for Raschel, and basing on it, take the features of industry machine into consideration, superiorize the technical parameters as require, select suitable kind and ratio of oilant.
本文根据拉舍尔的特殊要求，提出拉舍尔专用涤纶牵伸丝的技术参数，并据此结合企业设备特点，优化有关工艺参数，合理选择油剂种类及比例，经生产实践、质量控制、检测，成功研制出拉舍尔专用涤纶牵伸丝。
A series of new products of PA6 bright profiled fully drawn yarn have been developed by our company.
本文介绍了本公司锦纶6有光异形全牵伸丝系列新产品的特点及开发过程，论述了与此相关的设备改造和关键性技术的开发。
Production and Study of Bright N-6 16.7 dtex/5f Drawn Yarn
普通加弹机开发生产有光牵伸丝的工艺设备探讨
A Material Analysis of the Uneven Dyeing of Draft Compound Silk Fabrics of Polyester Fiber;
涤纶牵伸复合丝织物染色不匀的原料分析
Development and Application of Low Roughness Stretching Roller Used for High Strength Nylon66 Fine Filament Yarn
尼龙66低旦丝用细面牵伸辊的开发和应用
Effects of drawing technology on the properties of PTT/PET bi-component filaments
牵伸工艺对PTT/PET复合长丝性能的影响(英文)
Effect of polyurethane filament draft ratio on elastic fabric performance
氨纶丝预牵伸倍数对弹力织物性能的影响
The process of drawing irreversibly stretches the spun filaments and winds up the stretched yarn. The strength and recoverable extensibility are thereby increased.
在牵伸过程中连续拉伸长丝,并将其卷绕起来,长丝的强度和弹性会因此而提高。
Drawing machine under pressurized steam is key equipment for preparation high quatity PAN precursors.
加压水蒸汽牵伸机是制取高性能碳纤维原丝的关键设备。
"Spinning is the process of drawing out and twisting a mass of cleaned, prepared fibres. Filament yarns generally require less twist than do staple yarns."
纺纱是对纤维集合体牵伸加捻的过程。长丝比短纤维需要的捻度少。
The conversion of nylon chips into fiber comprises two distinct processes: spinning and drawing.
从尼龙切片到纤维的转化包括两个不同的过程：纺丝和牵伸。
Characterization on the Structure and Mechanical Properties of Polyacrylonitrile Precursors on Different Draw Stages;
不同牵伸倍数聚丙烯腈原丝的结构表征及其力学性能研究
Development of technology and instrument about producing PET filament used for sewing threadⅢResearch on manufacturing technology of PET filament used for sewing thread
多级牵伸缝纫线用长丝技术及设备开发 Ⅲ缝纫线用涤纶长丝生产工艺的研究
Development of technology and instrument about producing PET filament used for sewing threadⅡDesign of technology process and section of raw material
多级牵伸缝纫线用长丝技术及设备开发 Ⅱ.工艺路线设计及原料筛选
Bardenheuer's extension
巴登霍伊厄氏牵伸术
Modern controlled drafting systems use drafts of the order of 30.
新式的牵伸控制系统使用大约30倍牵伸。
The effect of different drawing condition and way on structure of PAN precursor
牵伸条件以及牵伸方式对PAN纤维结构的影响
Process Analysis about the Additional Pressure Bar in the Drafting Zone on the Spinning Frame
细纱机牵伸区附加压力棒牵伸工艺分析
Influence of Back Zone Drafting Multiple on Pressure Bar Drafting in Spinning Front Zone
后区牵伸倍数对细纱前区压力棒牵伸的影响
