The reasonable tension revised coefficient of bolts and load-carrying capacity calculation formula of non-stiffened flanges are hereby presented in this paper.
通过对钢管结构无加劲法兰承力的系统试验,分析了无加劲法兰的变形和受力状态,研究了法兰承载力与法兰盘厚度、螺栓边距、螺栓疏密及偏心距的关系,并提出了合理的螺栓受力修正系数和法兰承载力计算公式。
Testing Application of Array Eddy Current Probes to Bolts;
涡流阵列探头技术在螺栓探伤中的应用
Failure analysis of bolt on the compress gas cooler;
压缩富气冷却器浮头螺栓断裂失效分析
Optimum Analysis of the Finite Element of the Bolt Connection Structure;
螺栓联结结构的有限元优化分析
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
double-screw bolt
螺柱，双头螺纹螺栓
draw-bar carrier bolt
牵引杆托(板)螺栓
a safety harness, bolt
安全带、 保险螺栓.
brass bolts and nuts with round head
黄铜圆头螺栓和螺母
Mounting Bolts (Screws)—IAC Motor
固定螺栓（螺丝）—IAC马达。
LDP Pump Bracket Nuts/Bolts
LDP泵支架螺帽/螺栓
follower stud and unt
从动板柱螺栓及螺母
Mechanical property requirements for studs shall be the same as those for bolts.
柱头螺栓的机械性能要求与螺栓相同。
Loosen oil pan bolts and remove the front bolt at each side.
松动油底壳螺栓，拆下每一面的前螺栓。
Install connecting rod bolt protectors on rod bolts.
在连杆螺栓上安装连杆螺栓保护件。
" Bolts, screws and studs--Nominal lengths, and thread lengths for general purpose bolts"
GB/T3106-1982螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度
" Bolts, screws, nuts and accessories--Terminology and nomenclature"
GB/T3099-1982螺栓、螺钉、螺母及附件名词术语
" Tolerances for fasteners--Bolts, screws and nuts"
GB/T3103.1-1982紧固件公差螺栓、螺钉和螺母
Nuts have internal (or female) threads to match those of the Bolt.
螺母上有内(或阴)螺纹,与螺栓上的螺纹相啮合。
The method is also proposed on making thread-hole and bolt in interving concerted process, bolt connection as well.
干涉配合螺接过程中螺孔和螺栓的加工方法以及螺栓的安装方法。
blank of iron or steel for bolts
螺栓坯料，铁或钢制的
