您的位置:汉字大全 > 行业英语 > 海洋 > effective throat thickness是什么意思

effective throat thickness是什么意思

中文翻译有效焊缝厚度

网络释义

1)effective throat thickness,有效焊缝厚度2)effective throat,焊缝有效厚度3)effective thickness of fillet weld,角焊缝有效厚度4)joint width,焊缝厚度5)effective length of weld,焊缝有效长度6)throat depth (thickness) of fillet weld,角焊缝厚度

用法例句

    In order to study the influence of brazing temperature and brazing pressure on shearing strength and joint width of brazed diamond tool,hi-frequency induction brazing experiments with PCD compact and cemented carbide YG8 were carried out.

    本文通过PCD复合片与YG8硬质合金的高频感应钎焊试验,研究了钎焊温度和钎焊压力对PDC刀具钎焊接头强度及焊缝厚度的影响;并用扫描电镜观察了钎焊接头的显微结构。

    Transfer Behavior Study in Weld Thickness Direction of the Welding Plastic Metal in Friction Stir Welding

    搅拌摩擦焊焊缝塑性金属在焊缝厚度方向的迁移行为研究

    "Where thickness characteristics at the joint are more important than strength, a thinner welder is possible at reduced joint strength. "

    如果焊缝的厚度比强度更重要,则在降低强度条件下可使焊缝更

    Research on Weld Toughness of X80 Heavy Section Pipeline Steel at Different Welding Speeds

    X80厚壁管线钢不同焊接速度下焊缝韧性研究

    Application of Multizone Ultrasonic Inspection for Great Thickness EBW

    应用超声多区聚焦技术检测大厚度电子束焊缝

    "High strength steels may result in increased thickness, however, the resulting joint is strong, smooth and recoilable. "

    高强度钢可能更厚些,但是,焊缝是强固的,平滑的,可重卷的。

    Decrease the weld number as possible: Choosing the right thickness of steel plate can reduce the rectification amount after welding!

    尽可能的减少焊缝数量:适当选择板壁的厚度,可减少焊后变形矫正量。

    Judge of Transverse Crack of Thick-Walled Seam by Ultrasonic Testing Method

    厚壁焊缝横向裂纹的超声波判别方法

    Forming limit and weld seam movement of TWBs with different thicknesses in square cup

    差厚拼焊板拉深方盒形件成形极限及焊缝移动

    Microstructure and performance of friction stir welding in 6063 aluminum alloy

    5mm厚6063铝合金搅拌摩擦对焊焊缝组织分析

    Indicates concave, convex or flush welds. Increase height to fit above other weld symbol.

    指示凹焊缝、凸焊缝或平焊。增加高度以配合其他焊接符号。

    Regression and Analysis on Metal Strength of Welding Seam of Welding Core Wine

    药芯焊丝焊缝金属强度的回归与分析

    Study of Length Calculation of Three Side Welded Lap;

    三面围焊搭接角焊缝长度计算的探讨

    As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.

    对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。

    Control of Uniforming Compositions for the Large Thickness Joints of the Titanium Alloy

    厚板钛合金电子束焊缝的成分均匀性控制

    Investigation into Ultrasonic Testing of Thick Walled Austenitic Welds

    厚壁奥氏体焊缝超声波检测之探究(英文)

    Research on shrinkage regularity of butt weld of variable thickness steel plates for Zhengzhou Yellow River Bridge

    郑州黄河桥不等厚对接焊缝收缩规律研究

    Wave Mode Conversion on Welding Ultrasonic Testing for Middle or Thick Plate

    中厚板焊缝超声波探伤中的波型转换辨析

    Study on the Welded-line Movement of Square Cup Using TWBs in Hydro-forming Deep Drawing

    差厚拼焊板方盒形件充液拉深中焊缝移动的研究

Copyright © 2022-2024 汉字大全www.hanzidaquan.com All Rights Reserved 浙ICP备20019715号