The elastic theory of biaxial nematics was used to study the periodic distortion in an external field.
利用双轴向列相液晶的弹性能公式,研究在外场中双轴向列相液晶的周期性形变。
Numerical simulation of periodically deforming circular cylinder;
周期性变形圆柱绕流特征的数值分析
Effect of particle shape on uniaxial ratcheting of SiC_P/6061Al composites and its microscopic plastic deformation characteristics;
颗粒形状对复合材料单轴棘轮行为及其细观塑性变形特征的影响
Self-healing mechanism of inner crack in plastic deformation under high temperature;
高温塑性变形中孔隙性缺陷自修复机理
Plastic Deformation of a Mg-based Bulk Amorphous Alloy in Supercooled Liquid Region;
镁基大块非晶合金在深过冷液相区的塑性变形
The law of the microstructure transformation of SiC p/Al composite based on powder metallurgy in hot plastic forming is investigated.
实验研究了基于 PM的 Si Cp/Al复合材料在热塑性变形过程中显微组织的变化规律。
It was shown that the specific essential work (we) and specific plastic work (βwp) increased with the addition of EPDM and/or POE, which suggested that the elastermer had improved the material’s ability to resist crack propagation and produce plastic deformation.
结果表明,加入EPDM或POE后,共混物的比基本断裂功we和比塑性形变功βwp均有提高,说明弹性体的加入提高了材料抵抗裂纹扩展的能力和发生塑性形变的能力。
Under the suitable condition, plastic deformation at the bonding interface happened, the contact area increased, and the diffusion bonding was completed with the pores at the bonding interface being eliminated or significantly reduced.
结果表明 :采用适当的连接工艺 ,可使此种材料产生塑性形变 ,接触面积增加 ,空洞收缩和闭合 ,扩散进行充分 。
Under the condition of proper speed and temprature, the plastic deformation curves of ABS blends added with different lubricants were determined by using HAAKE- 9000 RHEOMETER.
采用HAAKE-9000型扭矩流变仪,在一定转速和温度下,测定了添加不同润滑剂时ABS体系的塑性形变曲线,对各种曲线进行分析,并研究了润滑剂的种类和用量对ABS力学性能和热性能的影响。
element of mechanics of plasticity
塑性变形的力学原理
extrusion stress
(塑性变形的)挤压应力
It is assumed that plastic deformation stems from the localization of shear strain.
岩样的塑性变形假设根源于塑性应变局部化。
The plastic deformation on ribs caused by punch push down and skin springback.
筋条的塑性变形既有凸模下压导致的塑性变形,又有蒙皮回弹导致的塑性变形;
Thermoplastic Deformation Behavior and Microstructure Evolvement of TA15 Titanium Alloy;
TA15钛合金热塑性变形行为与组织演变
Palstic Deformation Mechanism and Microstructure Evolution of Nanocrystalline Nickel;
纳米金属镍的塑性变形及微结构演变
Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation
GH4145高温合金热塑性变形流变应力研究
A method to improve seal property by plastic deformation;
一种用塑性变形改善密封性能的方法
Research on Deformation Mechanism and Relationship Between Microstructure and Properties of Quenching and Partitioning Steel
Q&P钢塑性变形机制及组织-性能研究
Deforming resistance is capability of material resisting deform.
变形抗力是材料本身抵抗塑性变形的能力。
Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation.
低渗透气藏孔隙变形具有弹塑性变形的特征。
EFFECT OF PRESTRAIN ON THE SUPERPLASTIC DEFORMATION BEHAVIOR OF LOW-ALLOY HIGH-CARBON STEEL
预变形对低合金高碳钢超塑性变形行为的影响
The shale beds in between generally deform plastically.
夹在其中的页岩层通常是塑性变形。
The Force for The Plastic Deformation of One End of Round Bar Between the Dies with Dip Angle
圆杆端部在倾斜压模间的塑性变形力
Methodology of numerical computation for elastoplastic deformation of clay
黏土弹塑性变形的数值模拟方法研究
In Situ Investigation on Plastic Deformation and Cracking of Metals under TEM/SEM;
金属塑性变形与断裂的TEM/SEM原位研究
Simulation of Q235 Steel Recrystallized Microstructure during Hot Forming Process;
Q235钢热塑性变形过程中微观组织模拟
Study on Superplasticity Behavior of ECAEed Magnesium Alloys;
ECAE镁合金超塑性变形行为的研究
