The calculating method and its solution on tilting-pad bearing are discussed,and the program is designed.
讨论了可倾瓦轴承的设计计算方法和求解过程。
In the process of overhauling a power plant,after anatomizing some existent faults of tilting-pad bearings,the methods to deal with the faults are put forward to ensure the stable operation of steam turbine.
通过某电厂检修过程中可倾瓦轴承出现的一些故障,经仔细分析,找出了处理这些故障的办法,从而保证了汽轮机组的稳定运行。
Abnormal vibration was occurred in tilting pad journal bearing of Banshan No.
对国内首台GE公司生产的9F单轴燃机发生在可倾瓦轴承上异常振动进行了介绍、分析和诊断。
The elastic and thermal deformations of tilting pad journal bearings subjected to various pressures and temperatures are calculated rapidly using a twenty node finite element method.
用２０节点有限元快速计算径向可倾瓦轴承瓦块，在任意压力分布和温度分布下的弹性变形和热变形，并验证了所编程序的正确性和精确
The finite element method and finite difference method are employed to establish the model for considering the three dimensional elastic deformations of pad and thermal effects in a tilting pad journal bearing.
用有限元素法和有限差分法建立了可倾瓦轴承瓦块三维弹性变形及热效应的计算模型。
This paper describes,analyses and diagnoses the oil whirl and whip faults in the tilting pad bearings of the 9F type gas generator set of single shaft.
对9F单轴式燃机发生在可倾瓦轴承上的油膜涡动和油膜振荡进行了介绍、分析和诊断。
The characteristics of the tilting pad bearing in which the pivots are rigid,elastic or in combination are explained.
介绍了可倾瓦气体动压轴承静特性的计算方法,分析了轴承参数对其静特性的影响,对瓦块支承为刚性、弹性及其组合的可倾瓦轴承的特点进行了阐述,并以设计曲线的形式给出了计算结果。
Treatment on oil throw fault in lower guide bearing of generator of Shuibuya Hydropower Plant
水布垭水电站发电机下导轴承甩油问题处置
The report briefly presents structure characteristics of lower guide bearing and thrust bearing for turbine-generator unit , problems existed during operation and treatment process and suggestions at Ertan hydropower station .
简要介绍了二滩水电站水轮发电机组下导轴承及推力轴承结构特点、运行中出现的问题及处理过程和建
The machining and assembling methods for bearing with tilted pad was presented.
介绍了可倾瓦轴承的加工及装配方法。
Common Fault and Treatment of the Tilting-pad Bearing of Power Plant Steam Turbine
汽轮机可倾瓦轴承的常见故障与处理
Study on Dynamic Modeling and Behaviors of Tilting-Pad Bearings;
可倾瓦轴承动力学建模及动力特性研究
Dynamic Coefficients of Tilting Pad Guide Bea-rings of Hydraulic Turbine Sets, Power Engineering
水电机组可倾瓦导轴承动力特性系数
Case-based reasoning in scheme design for tilting-pad thrust bearing
基于实例推理的可倾瓦推力轴承方案设计
The analysis and study on the bearing capacity influenced by the parameter of aerodynamic pressured bearing with tilted bush
可倾瓦气体动压轴承参数对其承载能力影响的分析与研究
Study on Nonlinear Dynamics of Tilting PAD Journal Bearing-Rotor System;
可倾瓦滑动轴承—转子系统非线性动力学特性分析
Study on Nonlinear Dynamics and Stability of Tilting Pad Journal Bearing-Rotor System
可倾瓦滑动轴承—转子系统非线性动力学特性及稳定性分析
Rubbing Fault Diagnose of Tilting Pad Journal Bearing by Acoustic Emission
基于声发射的可倾瓦径向滑动轴承碰摩故障诊断
upper center crankshaft bearing
曲轴主轴承上中轴瓦
Remove the lower insert from the bearing cap.
从轴承盖上拆去下轴瓦。
Install the lower bearing inserts into the main bearing caps.
安装下轴瓦到主轴承盖。
The hydrogeneratingset can operation safely with full loads by using elastic metallic plastic pads formaximum dimension, thrust bearing.
推力轴承改用弹性金属塑料瓦后，机组可安全地满负荷运行。
Load analysis of cylindrical roller bearing with inclined axis
圆柱滚子轴承轴线倾斜时的载荷分析
full journal bearing
全围式轴承（轴瓦在3600范围内包围着轴颈的滑动轴承）
Pilot bearing in crankshaft. The pilot bearing in the crankshaft is usually either a Bushing or a Ball bearing.
曲轴上的导向轴承:曲轴上的导向轴承一般或者是轴瓦,或者是球轴承。
For this big-end bearing, steel-backed lead or tin shell bearings are used.
对连杆大头轴承来说，使用的是铅的钢背或锡的轴瓦式轴承。
renew worn tyres, bearings, brake-blocks, etc
更换磨损的轮胎、 轴承、 闸瓦等
