Processing Approach for Small Cylindric Carbon Steel Casting in Investment Casting;
小型圆筒形碳钢铸件熔模铸造工艺探讨
By analyzing the test data of hardness and tensile strength of carbon steel casting samples,the regression equation between tensile strength and hardness was derived and the empirical formula of them was also obtained.
通过分析碳钢铸件试样的硬度和拉伸试验的数据,建立碳钢铸件抗拉强度与硬度的回归方程,得到两者之间关系的经验公式,并将公式成功应用于实际生产。
Development of Water-base Coating for Carbon Steel Castings in LFC;
选用高铬刚玉耐火骨料 ,氧化淀粉和硫酸铝为粘结剂 ,通过正交试验 ,确定了碳钢铸件消失模水基涂料的最佳配比 ,考察了涂料的多种性能 ,并进行了生产应
General purpose industrial valves-Specification of carbon steel castings
GB/T12229-1989通用阀门碳素钢铸件技术条件
The Factors Influencing Carburization of Steel Castings in EPC and Its Preventive Measures
气化模铸钢件增碳的影响因素及解决措施
It is an ideal material for precision casting of Carbon Steel, Stainless Steel, Rrefractory Steel as well as moudle of Alumina Alloy and Titatium Alloy.
是碳素钢、锈钢，耐热钢等复杂精密铸件和铝，钛合金熔模铸造的理想原料。
HOT DUCTILITY OF CARBON STEEL CC SLABS?CONTAINING 0.07%～0.30% OF CARBON
含碳0.07%～0.30%碳素钢连铸坯的热延性
The abrasive tools made of it are suitable for the gringding of carbon steel, malleable cast iron, hard bronze, etc.
用其制造的磨具，适用于碳素钢、锻铸钢、锻铸铁、青铜等的磨削。
Effects of Coating Layer Thickness on Surface C Content in Carbon Steel Casting in EPC
涂层厚度对气化模铸钢件表面含碳量的影响
Study on the Effect of Pattern Materials on the Steel Casting Surface Carburizing in EPC Process
模样材料对气化模铸钢件表面增碳影响的研究
Study on Carburization Mode and Law of Steel Casting in EPC Process
气化模铸钢件增碳的形式及其规律研究
Mathematical Analysis and Calculation about Surface Carburizing of Steel Casting in EPC
消失模铸钢件表面增碳的数理分析与计算
Effect of Technological Parameters on Microstructure of SiC Particulate Reinforced High Manganese Steel Matrix Composite with Process of V-EPC
工艺条件对高锰钢铸渗碳化硅组织特征的影响
A wide range of carbon steel, low alloy stell and stainless steel are available on customer's specifications.
可根据客户要求的材质标准生产各种碳钢、合金钢和不锈钢铸件。
Influence of Cu and RE on Cast-penetrated Layer on Medium Carbon Steel
铜及稀土元素对中碳钢铸渗层组织性能的影响
Technical requirements for hot-rolled carbon tool steel sheets and plates
GB/T3278-1982碳素工具钢热轧钢板技术条件
Hot-rolled round carbon steel bars for standard parts
GB/T715-1989标准件用碳素钢热轧圆钢
The Influence of Inclusions on Properties of the Cast Weld Structure Composed of Low Carbon High Manganese Steel Casting
低碳高锰铸钢件中夹杂物对铸焊结构性能的影响
A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.
研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。
General purpose industrial valves-Specification of carbon steel forgings
GB/T12228-1989通用阀门碳素钢锻件技术条件
Carbon tool steels--Technical requirements
GB/T1298-1986碳素工具钢技术条件
